[App_rpt] app_rpt setup and requirements.

Gary Young pcfrover at tcomeng.com
Mon Oct 9 12:42:51 EDT 2006


Typo on the radio, I meant 897.

Is there a rpt.conf definition for which serial port to use? I didn't see
one noted.

Sorry for all the question, I am just trying to understand all the
capabilities of this system.
We have two repeaters working and want to add some remote bases.

Gary 

> -----Original Message-----
> From: app_rpt-bounces at lists.illiana.net 
> [mailto:app_rpt-bounces at lists.illiana.net] On Behalf Of Jim Duuuude
> Sent: Monday, October 09, 2006 9:30 AM
> To: app_rpt at lists.illiana.net
> Subject: Re: [App_rpt] app_rpt setup and requirements.
> 
> 
> As I said, with an ARIB board you would use a PC's serial 
> port for CAT.
> 
> I am not familiar with a '787', but (I believe) according to 
> Yaesu, CAT 
> should be the same on all
> radios that support it. I just know it works on the 897 and 
> like radios.
> 
> >From: "Gary Young" <pcfrover at tcomeng.com>
> >Reply-To: pcfrover at tcomeng.com,Asterisk Repeater Controler 
> ><app_rpt at lists.illiana.net>
> >To: "'Asterisk Repeater Controler'" <app_rpt at lists.illiana.net>
> >Subject: Re: [App_rpt] app_rpt setup and requirements.
> >Date: Mon, 9 Oct 2006 09:03:40 -0700
> >MIME-Version: 1.0
> >Received: from lists.illiana.net ([207.227.243.140]) by 
> >bay0-mc9-f8.bay0.hotmail.com with Microsoft 
> SMTPSVC(6.0.3790.2444); Mon, 9 
> >Oct 2006 09:03:49 -0700
> >Received: (qmail 3395 invoked from network); 9 Oct 2006 
> 16:03:47 -0000
> >Received: from localhost (HELO ?127.0.0.1?) (127.0.0.1)  by 
> 0 with SMTP; 9 
> >Oct 2006 16:03:47 -0000
> >Received: (qmail 3385 invoked from network); 9 Oct 2006 
> 16:03:44 -0000
> >Received: from sccrmhc14.comcast.net (204.127.200.84)by 0 
> with SMTP; 9 Oct 
> >2006 16:03:44 -0000
> >Received: from den 
> (c-69-181-173-31.hsd1.ca.comcast.net[69.181.173.31])by 
> >comcast.net (sccrmhc14) with SMTPid 
> <2006100916034001400qq9pne>; Mon, 9 Oct 
> >2006 16:03:44 +0000
> >X-Message-Info: LsUYwwHHNt3660MmjhEvYg2f34OAemlKtU9j2Z7TuGo=
> >Return-Path: <pcfrover at tcomeng.com>
> >Delivered-To: mailman-app_rpt at lists.illiana.net
> >X-Mailer: Microsoft Office Outlook 11
> >X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2962
> >thread-index: AcbrcaBOJrGbAuozSGGWc/wmgygNOwASqXYw
> >X-BeenThere: app_rpt at lists.illiana.net
> >X-Mailman-Version: 2.1.6
> >Precedence: list
> >List-Id: Asterisk Repeater Controler <app_rpt.lists.illiana.net>
> >List-Unsubscribe: 
> ><http://lists.illiana.net/mailman/listinfo/app_rpt>,<mailto:a
> pp_rpt-request at lists.illiana.net?subject=unsubscribe>
> >List-Archive: <http://lists.illiana.net/pipermail/app_rpt>
> >List-Post: <mailto:app_rpt at lists.illiana.net>
> >List-Help: <mailto:app_rpt-request at lists.illiana.net?subject=help>
> >List-Subscribe: 
> ><http://lists.illiana.net/mailman/listinfo/app_rpt>,<mailto:a
> pp_rpt-request at lists.illiana.net?subject=subscribe>
> >Errors-To: app_rpt-bounces at lists.illiana.net
> >X-OriginalArrivalTime: 09 Oct 2006 16:03:49.0957 (UTC) 
> >FILETIME=[82542750:01C6EBBC]
> >
> >Is a 'Quad PCI card' required for Yaseu CAT control of a 787 
> or can one of
> >the standard PC serial ports be used?
> >
> >Gary
> >
> > > -----Original Message-----
> > > From: app_rpt-bounces at lists.illiana.net
> > > [mailto:app_rpt-bounces at lists.illiana.net] On Behalf Of 
> Jim Duuuude
> > > Sent: Monday, October 09, 2006 12:07 AM
> > > To: app_rpt at lists.illiana.net
> > > Subject: Re: [App_rpt] app_rpt setup and requirements.
> > >
> > > As far as the CAT protocol goes, the ARIB board talks to the
> > > "Packet Data
> > > interface", the
> > > 6 pin connector (I believe), which has the Tx and Rx audio,
> > > PTT and COR. The
> > > CAT protocol
> > > goes through one of the serial ports on the PC. On the PCI
> > > card, we talk to
> > > the serial
> > > port (CAT port) directly also, all through 1 8 pin cable,
> > > (which forks off
> > > to 2 connectors
> > > one 6 pin and one 8 pin on the back of the Yaesu radio).
> > >
> > > Yes we fully support CAT in frequency/mode agile mode along
> > > as well as the
> > > Doug Hall RBI-1 as well as the Kenwood TM-G707.
> > >
> > > As far as Digium cards supporting E&M goes, I really think
> > > there is VERY
> > > little need
> > > or desire for such things these days.  (Actually the FXS also
> > > operates as a
> > > DPT
> > > like a DID trunk, which technially *is* a 2 wire loop-closure E&M
> > > Interface).
> > >
> >
> >_______________________________________________
> >App_rpt mailing list
> >App_rpt at lists.illiana.net
> >http://lists.illiana.net/mailman/listinfo/app_rpt
> 
> 
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
> 




More information about the App_rpt-users mailing list