[App_rpt] Passing DTMF?

Gary Young pcfrover at tcomeng.com
Sat Oct 28 21:57:30 EDT 2006


Thanks for the info. Confirm you must go into command mode to generate the
DTMF?
I was not using command mode (I don't really understand what it command mode
is) so that could be the problem.
My config is the same as yours so hopefully it is the lack of 'command mode'
that was the problem. I'll try it and see what happens.

Tell me more about using the '0' feature instead of a node number.

Gary 

> -----Original Message-----
> From: app_rpt-bounces at lists.illiana.net 
> [mailto:app_rpt-bounces at lists.illiana.net] On Behalf Of Jim Duuuude
> Sent: Saturday, October 28, 2006 1:47 PM
> To: app_rpt at lists.illiana.net
> Subject: Re: [App_rpt] Passing DTMF?
> 
> On my test node (102), I set the following:
> 
> duplex = 0                              ; No duplex, no 
> response (mostly)
> propagate_dtmf = yes                    ; Propigate 
> non-function DTMF digits
> linktolink = yes
> 
> On my normal node (2001), I hit *3102 to bring up a full 
> duplex link to
> node 102. I then go into command mode for node 102, by
> entering *40 (since 102 was the last addressed node). Then,
> whatever touchtones I hit, like 123 comes out the transmitter
> of node 102 just like it should.
> 
> 
>




More information about the App_rpt-users mailing list