[App_rpt] Small Problem with Wiring the connector for USB FOB: [Fixed]

Stephen Rodgers hwstar at rodgers.sdcoxmail.com
Mon Oct 29 22:40:30 EDT 2007

Rev B of usbfob.pdf has been uploaded to the site with the fix to the
receive audio input attenuator.

Thanks for pointing this out to me.

Steve Rodgers, WA6ZFT

Roger F. Jordan wrote:
> Hi everyone...  I am in the process of setting up the CM-108 Sound FOB and
> found a discrepancy between the directions and the schematic!
> The directions say to connect the twisted connection of the 68K resister and
> the 470K resister to the connectors Pin 3 and the open end of the 470K to
> the white wire...   However the schematic shows the 470k going to pin 3 and
> the 68K going to Pin 5 (ground) and the connection of both the resisters
> going to the white wire...
> Before I get this thing together and find it does not work... Can someone
> tell me which is correct?
> I have the hard stuff done... IE getting that dadgum resister connected to
> the CM108 chip!! Heheh
> Thanks in advance!
> Roger W4RFJ
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt

More information about the App_rpt-users mailing list