[App_rpt] tail messages not working

Mark Hagler markhagler at gmail.com
Tue Oct 30 00:43:36 EDT 2007


Steve,

I got the card in the mail today and that's what I am using to test
with now.   Believe me I was very excited to see it so quickly!

My tail messages are working now, I found one minor difference
compared to the lines you pasted into e-mail... I had "tailmessages="
configured and not "tailmessagelist=" so a quick fix to the config
file and it works.

One of the example configs I downloaded from the CVS repository shows
the incorrect "tailmessages" config entry which is how I ended up with
that, perhaps it got re-named somewhere along the line.

Anyway it works now, thank you for the help.



On 10/29/07, Stephen Rodgers <hwstar at rodgers.sdcoxmail.com> wrote:
> Mark,
>
> This seems to work for me:
>
> tailmessagetime=2000
>
> tailsquashedtime=1000
>
> tailmessagelist=vm-and,vm-and,vm-and
>
> Are you sure that you put it in an active numeric stanza?
> Also, do you have an idrecording defined, and is it working correctly?
>
> Additionally, I tried using files which didn't exist, and you do get an
> error message at the console.
>
> Do you have multiple node stanzas in the config file? If you are using
> the sample config file rpt.conf.sample, that could be the case?
>
> I have app_rpt version 0.76.
>
>
>
> P.S. I shipped your card on Saturday.
>
>
> Steve.
>
>
>
> Mark Hagler wrote:
> > Hello Everyone,
> >
> > I received the Analog Interface board today in the mail (Steve must
> > have shipped it SUPER priority mail).   To play with the software
> > quickly I just connected it via two Yaesu FT-7800R mobile radios (via
> > the 6-pin DATA jacks) and it works very nicely.
> >
> > One thing that I can't get to work right is tail messages.  I put this
> > in my config file:
> >
> > tailmessagetime=2000                    ; Play a tail message every 5 mins
> > tailsquashedtime=1000                   ; If squashed by another user
> > tailmessages=tail1,tail2,tail3          ;list of messages to be played
> > for tail message
> >
> > And I have recorded a sample audio file and copied it three times
> > (tail1.gsm, tail2.gsm, tail3.gsm).   It doesn't look like app_rpt is
> > even trying to play tail messages, as in I do not get any errors on
> > the Asterisk console about missing audio files.
> >
> > Just for testing I set the value to 2 seconds to get it to try to play
> > the files but it's not.
> >
> > Any thoughts?
> >
> > Thanks,
> >
> > Mark
> > _______________________________________________
> > App_rpt mailing list
> > App_rpt at lists.illiana.net
> > http://lists.illiana.net/mailman/listinfo/app_rpt
> >
>
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
>



More information about the App_rpt-users mailing list