[App_rpt] Dial-in access to remote base
kb4fxc at inttek.net
Thu Oct 9 15:57:15 EDT 2008
Okay, I reconfigured both remote bases as standard nodes--I just copied
the context used for my repeater node and set duplex=0. This works
properly with VOX mode, manual keying/unkeying, etc., just like with the
repeater node....No issues.
And, okay about the link status--I just thought the segfault was
So, other than loss of frequency agility, can you think of any other
"show stoppers" that I might hit by retiring remote base mode entirely and
just using standard mode for everything??
73, David KB4FXC
On Thu, 9 Oct 2008 hwstar at rodgers.sdcoxmail.com wrote:
> See below
<* snip *>
> First off: Link status doesn't make sense on a remote base!
> Remote bases are for exclusive use by one user at a time!
> Key-unkey flakiness. Two things to check:
> 1. What happens when you configure the HF and VHF radios as a standard node (with duplex=0)? The remote base code is separate from the standard node code, and there could be a keying bug could be in the remote base code.
> 2. Please confirm the phone key/unkey is not flakey on your standard node.This key/unkey issue could be a SIP configuration issue.
More information about the App_rpt-users