[App_rpt] Dial-in access to remote base

Eric Fort eric.fort at gmail.com
Thu Oct 9 16:01:18 EDT 2008


on a side note could the frequency agility be done through the dialplan and
agi?

Eric

On Thu, Oct 9, 2008 at 12:57 PM, David McGough <kb4fxc at inttek.net> wrote:

>
> Hi Steve,
>
> Okay, I reconfigured both remote bases as standard nodes--I just copied
> the context used for my repeater node and set duplex=0. This works
> properly with VOX mode, manual keying/unkeying, etc., just like with the
> repeater node....No issues.
>
> And, okay about the link status--I just thought the segfault was
> interesting.
>
> So, other than loss of frequency agility, can you think of any other
> "show stoppers" that I might hit by retiring remote base mode entirely and
> just using standard mode for everything??
>
> 73, David KB4FXC
>
>
>
> On Thu, 9 Oct 2008 hwstar at rodgers.sdcoxmail.com wrote:
>
> > See below
> >
> > Steve
> > WA6ZFT
> >
> > >
>
> <* snip *>
>
> >
> > First off: Link status doesn't make sense on a remote base!
> > Remote bases are for exclusive use by one user at a time!
> >
> > Key-unkey flakiness. Two things to check:
> >
> > 1. What happens when you configure the HF and VHF radios as a standard
> node (with duplex=0)? The remote base code is separate from the standard
> node code, and there could be a keying bug could be in the remote base code.
> >
> > 2. Please confirm the phone key/unkey is not flakey on your standard
> node.This key/unkey issue could be a SIP configuration issue.
> >
> >
>
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20081009/67c3bea5/attachment.html>


More information about the App_rpt-users mailing list