[App_rpt] Error on asterisk box

RED BUTTON MOBILE jrorke at cogeco.ca
Fri Oct 10 20:00:21 EDT 2008


The IBM machine I have is a Think Center model number MT-M 8084-Y11
Its a P4 3 gig machine with 1 gig of memory.

Regards,

Jon


John Yaldwyn wrote:
> Hi John,
>
> Can you post the IBM model (XXXX-YYY number) concerned please?
>
> Cheers, John
>
>  
>
> -----Original Message-----
> From: app_rpt-bounces at lists.illiana.net
> [mailto:app_rpt-bounces at lists.illiana.net] On Behalf Of Jon Rorke
> Sent: Saturday, 11 October 2008 04:15
> To: app_rpt at lists.illiana.net
> Subject: Re: [App_rpt] Error on asterisk box
>
> Hi All, I just wanted to let you know that adding the noapic to the
> grub.conf file seems to have cured the lockup error issue I was
> experiencing on my IBM box.
> Also in the BIOS the APM mode was on.
> Turning it off did not fix the problem but adding the noapic did the
> trick!
>
> By the way my Centos is
>
> 2.6.18-92.1.10.el5
>
>
> So its been running nonstop now for over a day and a half with no
> problems.
>
> Thanks, for the help.
>
> Jon VA3RQ
>
>
>
>
>   
>> Jon,
>>
>> This sounds to me like a problem in the PC itself.
>>
>> This is a shot in the dark: the APIC's on on some PC's are flaky under
>>     
>
>   
>> linux.
>>
>> You could try adding noapic to the kernel boot line in /etc/grub.conf:
>>
>>   
>>     
>>>> # grub.conf generated by anaconda
>>>> #
>>>> # Note that you do not have to rerun grub after making changes to 
>>>> this file # NOTICE:  You do not have a /boot partition.  This means
>>>>         
> that
>   
>>>> #          all kernel and initrd paths are relative to /, eg.
>>>> #          root (hd0,0)
>>>> #          kernel /boot/vmlinuz-version ro root=/dev/hda1
>>>> #          initrd /boot/initrd-version.img
>>>> #boot=/dev/hda
>>>> default=0
>>>> timeout=5
>>>> splashimage=(hd0,0)/boot/grub/splash.xpm.gz
>>>> hiddenmenu
>>>> title CentOS (2.6.18-92.1.13.el5)
>>>>         root (hd0,0)
>>>>         kernel /boot/vmlinuz-2.6.18-92.1.13.el5 ro noapic
>>>>         
> root=LABEL=/
>   
>>>>         initrd /boot/initrd-2.6.18-92.1.13.el5.img
>>>> title CentOS (2.6.18-53.el5)
>>>>         root (hd0,0)
>>>>         kernel /boot/vmlinuz-2.6.18-53.el5 ro root=LABEL=/
>>>>         initrd /boot/initrd-2.6.18-53.el5.img
>>>>         
>>>     
>>>       
>> I have an IBM box which does has to have this done in order to stay 
>> working. The groub.conf above is from that box.
>>
>>
>> Steve
>> WA6ZFT
>>   
>>     
>
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
>
>   



More information about the App_rpt-users mailing list