[App_rpt] Problems with Echolink on app_rpt

Matt Beasant g4rky at yahoo.co.uk
Sat Oct 11 11:14:15 EDT 2008


Hi Steve,

Sorry, just seen your other email - I did try the instructions in the ACID
sys admin guide, my version dated 10/05/2008.

In fact this part of the guide makes no mention of the fact you need to add
a line into extensions.conf - perhaps I missed a page but the next page in
my guide is Appendix A and lists the references . After a pointer from
Ramesh, I found the other guide and then, searched the message archive I
found the earlier messages which had this different text in the
extensions.conf, so I gave it a try and it worked!

Is there a bit missing from the Admin guide?

Best wishes,

Matt

2008/10/11 <hwstar at rodgers.sdcoxmail.com>

> Matt,
>
> If you followed the instructions is the ACID sysadmin manual, everything
> should be fine. Since database show
> is working, most of it is up and running. You might want to post your
> echolink.conf file with rhe password obiliterated
> to the list so that we can see if it is ok.
>
> If you try to connect before everyone gets an updated list
> the connection will fail. Please try after about an hour
> so that everyone gets a list with your node in it.
>
> Something else to check: Is your node showing up on echolink.org?
>
> Finally, don't worry about this message:
>
> > WARNING[5786] file.c:1198 waitstream_core: Unexpected control subclass
> '13'
>
> Steve
> WA6ZFT
>
>
>
>
> >
> > From: "Matt Beasant" <g4rky at yahoo.co.uk>
> > Date: 2008/10/11 Sat AM 01:55:47 PDT
> > To: "Asterisk Repeater Controler" <app_rpt at lists.illiana.net>
> > Subject: [App_rpt] Problems with Echolink on app_rpt
>  >
> > Dear all,
> >
> > I've upgraded my node to the latest release and have attempted to get
> > Echolink working on my node.
> >
> > However, I'm having problems and wondered if anyone could point me in the
> > right direction for a fix?
> >
> > When I try to make an outgoing call from my node to an echolink node, I
> > instantly get the "node connection failed" message.
> >
> > On the CLI, the announcement text is immediately preceeded by:
> >
> > WARNING[5786] file.c:1198 waitstream_core: Unexpected control subclass
> '13'
> >
> > When I try to make a call IN to my node form an Echolink node, I see:
> >
> > ERROR[2508]: chan_echolink.c:2165 do_new_call: Cannot find DB entry for
> > a/ipaddr/81.156.xxx.xxx
> >
> > However, I do frequently see messages such as:
> >
> > NOTICE[2507]: chan_echolink.c:1758 sendcmd: Received OK from Echolink
> server
> > europe.echolink.org
> >
> > and the database show command works fine also.
> >
> > Do I need to follow these instructions here :
> > http://app-rpt.qrvc.com/echolink.html  or is my node already up to date
> > enough to not have to do this?
> >
> > I also noted the existence of an IRLP config file in the config examples
> - I
> > need IRLP functionality on my node and so is this something I can use
> too?
> >
> > Thanks in advance for any and all help received!
> >
> > Kind regards,
> >
> > Matt
> > G4RKY
> > node 2250 & 2237
> >
> >
>
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
>
>
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20081011/4e7ac637/attachment.html>


More information about the App_rpt-users mailing list