[App_rpt] ACID update procedure to install latest version of Asterisk

Eric Fort eric.fort at gmail.com
Sun Oct 12 13:49:29 EDT 2008


with the instructions given wget does not overwrite astupd.sh directly.  The
old file remains. and the new file is saved as astupd.sh.1. It also needs to
be made executable with chmod 770 before you can run it.

Eric


On Sat, Oct 11, 2008 at 8:56 PM, Stephen Rodgers <
hwstar at rodgers.sdcoxmail.com> wrote:

> A later version of asterisk is available for ACID installs.
>
> These upgrade instructions must be followed to the letter.
>
>
> 1. Change directories to /root
>
> 2. If you don't have an astupd.sh file STOP. Your ACID install is too
> old and you will need to do a fresh install which will install the
> latest version automatically. If you have to re-install, make a backup
> of your config files in  /etc/asterisk so that you can restore them to
> the new install.
>
> 3. If you have an astupd.sh file, you will need to update it by
> downloading a new version. Use the following wget command from the /root
> directory to do this:
>
> wget http://dl.allstarlink.org/installcd/astupd.sh
>
> 4. Once the new script is downloaded, type:
>
> ./astupd.sh
>
> 5. Your system will now be updated. Wait for the download and compile to
> complete.
>
> 6. Reboot your system and check to see that your node is functioning
> properly.
>
> Steve
> WA6ZFT
>
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20081012/771d18ee/attachment.html>


More information about the App_rpt-users mailing list