[App_rpt-users] My D945 Build not going so well

Stephen Rodgers sales at qrvc.com
Thu Jul 2 20:36:40 EDT 2009


Doug Bade wrote:
> Help ??
> 
> I am working on a TEST D945 build also. The instructions imply some 
> scripts are going to run after first boot. I do not seem to have any 
> asterisk related files in the test build I downloaded and installed.
> 
> I used the  file 
> <http://limeylinux.org/downloads/cfimg-d945gclf-1.0.7-test.tar.gz>
> 
> I used instructions here to build
> <http://app-rpt.qrvc.com/node/60>
> 
> 
> Specifically none of thi happened...
> <http://app-rpt.qrvc.com/node/71>
> 
> 
> I am assuming I need to download and build the allstar files ?? the 
> directions speak nothing of this that I found.. but maybe I am doing 
> something wrong?? The D945 box boots to a root login prompt and stops 
> there. After searching around inside I see no install or config 
> scripts to fetch the needed files..
> 
> I am guessing I need to wget these files????
> 
> Any input would be helpful to me ....
> 
> The CF build is fine and the files copied were 131 or so mb... but 
> looks like just the Limey Linux OS build with no AllStar files..
> 
> Doug
> KD8B
> 
> 
> 
> 
> At 08:58 PM 7/1/2009, you wrote:
>> OK, I think it worked but won't be able to try and boot till tonight. It did
>> make teh CF and is a bit over 121MB total.
>>
>> To make it work, I nuked the sudo -E parts and had to make a link 
>>from mkdosfs
>> to be mkfs.msdos. This one also choked on grep, and my way was to download
>> the file to my web server and get it from there. Had to do same for
>> lm-sensors.
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at qrvc.com
>> http://qrvc.com/mailman/listinfo/app_rpt-users
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
> 

There hasn't been much requests for the d945gclf version of Limey Linux.
All 1.0.7 versions are test versions right now until a few key app_rpt.c
bugs are fixed. Test versions are usually for testing only.

I just uploaded cfimg-d945gclf-1.0.7-test5.tar.gz, and deleted the older
test version.  This has asterisk installed and should prompt you at
first boot.

Steve
WA6ZFT





More information about the App_rpt-users mailing list