[App_rpt-users] Bug or wrong implementation?
Bob Brown - NØEUH
bbrown at byrg.net
Fri Jul 31 11:05:34 EDT 2009
Explanation is a lot clearer now
Thanks in Advance
Bob Brown, NØEUH
Kansas City Metro Area
Mike Ditka <http://www.brainyquote.com/quotes/authors/m/mike_ditka.html> -
"If God had wanted man to play soccer, he wouldn't have given us arms."
On Fri, Jul 31, 2009 at 09:58, Jon Rorke <jrorke at cogeco.ca> wrote:
> For a simplex node you must tell the usb fob or URI that you are
> connected to a simplex radio (not a full duplex radio like a repeater).
> Otherwise the moment it receives a signal it will attempt to key the
> same radio because it thinks it full duplex.
> So in usbradio.conf set duplex=0 for simplex radios.
> Also in rpt.conf you must tell App-rpt that you are running in half
> duplex node so you must state in the node stanza duplex=0.
> If you dont it will assume you are connected to a repeater.
> So I dont think its a bug it just needs to be configured correctly.
> Hope this helps.
> Jon VA3RQ
> > I don't understand something, and before I file this as a bug report
> > on Mantis, I want to make sure that it is.
> > My current setup consists of a DMK URI, and an Icom UHF commercial
> > radio running simplex. I have this parameter set in usbradio.conf:
> > duplex=0
> > If I set duplex=1, it will continually kerchunk. If I set it back to
> > duplex=0, when the radio receives a signal, it will transmit.
> > Only by adding this to my node stanza in rpt.conf will it behave as
> > duplex=1
> > Either I'm not understanding how this works, or I don't have something
> > configured or implemented correctly, or it's a bug?
> > tnx
> > Stephen
> > K1LNX
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the App_rpt-users