[App_rpt-users] Testing request: app_rpt 0.181 and chan_irlp 0.26

Matt Beasant g4rky at yahoo.co.uk
Sun May 17 10:15:17 EDT 2009


As an addition to my earlier email, I have now added the new code ( both
app_rpt and chan_irlp ) to node 2250 and node 2259.
The two nodes are connected together via IAX2.

Having established an iaxRpt connection to node 2259 and listening to 2250
via RF I can hear the following results:

Node 2250 has an incoming Echolink connection - announcement on 2250  is
remote echiolink node callsign - correct

Menwhile on node 2259, the echolink connection announcement is the node
number.

Reverse the node numbers and the scenario is also reversed i.e. incoming
Echolink call to 2259 results in the callsign announcement on 2259 and the
node number on 2250.

I have invoked COP 43 on both nodes.

I hope I have explained this clearly enough!

The CW now sounds lovely by the way. Thanks for that one.

Matt
G4RKY

2009/5/17 Matt Beasant <g4rky at yahoo.co.uk>

> SO far I have tested the changes to the announcements. I find that the
> echolink announcements are changed as intended but I see no change to the
> way the IRLP announcements work.
> I still get the Male IRLP announcer first and then the female Asterisk
> announcement.
>
> I tried using the command line:
> rpt cmd 2250 cop 40 2250
> and
> rpt cmd 2250 cop 41 2250
>
> neither one had any effect on IRLP announcements. So I tried assigning a
> DTMF code to the cop commands and this didnt work for me either.
>
> I have a question: What are the Foreign Link Local Output Path statements
> for?
>
> Thanks,
>
> Matt
>
> 2009/5/17 Stephen Rodgers <hwstar at rodgers.sdcoxmail.com>
>
> New versions of app_rpt.c and chan_irlp.c are available from svn:
>>
>>
>> app_rpt.c Version 0.181
>> chan_irlp.c Version 0.26
>>
>> 1. Better control of IRLP connect and disconnect messages through config
>> file options and DTMF commands, and added irlpplay CLI command
>> to assist in queuing the messages one at a time.
>>
>> Attempt to resolve Mantis bug 0000003.
>> New rpt.conf keywords for node stanza:
>> irlpann={0,1} (0 = no irlp disconnect/connect massages, 1 = play irlp
>> disonnect/connect messages)
>>
>> See source file for DTMF command usage.
>>
>> 2. Better control of Echolink connect and disconnect messages through
>> config file options and DTMF commands
>>
>> Attempt to resolve Mantis bug 0000002.
>>
>> New rpt.conf keywords for node stanza:
>> eannmode=(1,2,3} (1 = say node number only , 2 = say callsign only, 3 =
>> say node and callsign)
>>
>> See source file for DTMF command usage.
>>
>> 3. Added feature to call an external program on connect and disconnect.
>>
>> New rpt.conf keywords for node stanza:
>>
>> connpgm=yourconnectprogram
>> discpgm=yourdisconnectprogram
>>
>> Passes node which is processing the connect or disconnect as the first
>> arg (us), and node which is being connected or disconnected as the
>> second arg (them),
>>
>> Attempt to add Mantis feature request 0000007.
>>
>> 4. Convert morse code sender to use ast_playtones_start so that the
>> timing of the morse code characters is consistent.
>>
>> Attempt to resolve Mantis bug 0000005.
>>
>>
>> ---
>>
>>
>> Steve
>> WA6ZFT
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at qrvc.com
>> http://qrvc.com/mailman/listinfo/app_rpt-users
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20090517/7987eb77/attachment.html>


More information about the App_rpt-users mailing list