[App_rpt-users] Testing request: app_rpt 0.181 and chan_irlp 0.26

Jim Duuuude telesistant at hotmail.com
Sun May 17 11:40:11 EDT 2009


I have tried to duplicate this problem. I set up my nodes in a similar manner, and both nodes announce the same thing,
or whatever mode I have set them to.  It just works for me.

Date: Sun, 17 May 2009 15:15:17 +0100
From: g4rky at yahoo.co.uk
To: hwstar at rodgers.sdcoxmail.com
CC: app_rpt-users at qrvc.com
Subject: Re: [App_rpt-users] Testing request: app_rpt 0.181 and chan_irlp	0.26

As an addition to my earlier email, I have now added the new code ( both app_rpt and chan_irlp ) to node 2250 and node 2259.
The two nodes are connected together via IAX2.
Having established an iaxRpt connection to node 2259 and listening to 2250 via RF I can hear the following results:

Node 2250 has an incoming Echolink connection - announcement on 2250  is remote echiolink node callsign - correct
Menwhile on node 2259, the echolink connection announcement is the node number.

Reverse the node numbers and the scenario is also reversed i.e. incoming Echolink call to 2259 results in the callsign announcement on 2259 and the node number on 2250.
I have invoked COP 43 on both nodes.

I hope I have explained this clearly enough!
The CW now sounds lovely by the way. Thanks for that one.
MattG4RKY


2009/5/17 Matt Beasant <g4rky at yahoo.co.uk>
SO far I have tested the changes to the announcements. I find that the echolink announcements are changed as intended but I see no change to the way the IRLP announcements work.

I still get the Male IRLP announcer first and then the female Asterisk announcement.

I tried using the command line:rpt cmd 2250 cop 40 2250andrpt cmd 2250 cop 41 2250
neither one had any effect on IRLP announcements. So I tried assigning a DTMF code to the cop commands and this didnt work for me either.


I have a question: What are the Foreign Link Local Output Path statements for?
Thanks,
Matt

2009/5/17 Stephen Rodgers <hwstar at rodgers.sdcoxmail.com>


New versions of app_rpt.c and chan_irlp.c are available from svn:





app_rpt.c Version 0.181

chan_irlp.c Version 0.26



1. Better control of IRLP connect and disconnect messages through config

file options and DTMF commands, and added irlpplay CLI command

to assist in queuing the messages one at a time.



Attempt to resolve Mantis bug 0000003.

New rpt.conf keywords for node stanza:

irlpann={0,1} (0 = no irlp disconnect/connect massages, 1 = play irlp

disonnect/connect messages)



See source file for DTMF command usage.



2. Better control of Echolink connect and disconnect messages through

config file options and DTMF commands



Attempt to resolve Mantis bug 0000002.



New rpt.conf keywords for node stanza:

eannmode=(1,2,3} (1 = say node number only , 2 = say callsign only, 3 =

say node and callsign)



See source file for DTMF command usage.



3. Added feature to call an external program on connect and disconnect.



New rpt.conf keywords for node stanza:



connpgm=yourconnectprogram

discpgm=yourdisconnectprogram



Passes node which is processing the connect or disconnect as the first

arg (us), and node which is being connected or disconnected as the

second arg (them),



Attempt to add Mantis feature request 0000007.



4. Convert morse code sender to use ast_playtones_start so that the

timing of the morse code characters is consistent.



Attempt to resolve Mantis bug 0000005.





---





Steve

WA6ZFT



_______________________________________________

App_rpt-users mailing list

App_rpt-users at qrvc.com

http://qrvc.com/mailman/listinfo/app_rpt-users




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20090517/b1344f55/attachment.html>


More information about the App_rpt-users mailing list