[App_rpt-users] Fwd: Re: ACID install issue anyone seen this before? anyone know the centos default root password?

Steve Gladden steve at michiganbroadband.com
Sat Nov 21 06:07:15 EST 2009


Stephen Rodgers wrote:
> Steve Gladden wrote:
>   
>> On Fri, 20 Nov 2009, hwstar at rodgers.sdcoxmail.com wrote:
>>
>>     
>>>> From: David McGough <kb4fxc at inttek.net>
>>>> Date: 2009/11/20 Fri PM 12:33:29 PST
>>>> To: Steve Gladden <steve at michiganbroadband.com>
>>>> CC: sales at qrvc.com,  app_rpt mailing list <app_rpt-users at qrvc.com>
>>>> Subject: Re: [App_rpt-users] Fwd: Re: ACID install issue anyone seen
>>>> this
>>>>  before? anyone know the centos default root password?
>>>>
>>>>
>>>> On Fri, 20 Nov 2009, Steve Gladden wrote:
>>>> <snip>
>>>>         
>>>>> Just as per request and for comparing notes..
>>>>> Digging in deeper reveals the no sources error
>>>>> manually launching phase2 gies a little more detail:
>>>>>
>>>>>
>>>>> make[3]: Leaving directory `/usr/src/zaptel/menuselect/mxml'
>>>>> gcc -o menuselect menuselect.o strcompat.o menuselect_curses.o
>>>>> mxml/libmxml.a mxml/libmxml.a -lncurses
>>>>> make[2]: Leaving directory `/usr/src/zaptel/menuselect'
>>>>> make[1]: Leaving directory `/usr/src/zaptel/menuselect'
>>>>> Generating input for menuselect ...
>>>>> make[1]: Entering directory `/usr/src/zaptel'
>>>>> echo "You do not appear to have the sources for the
>>>>> 2.6.18-164.6.1.el5PAE kernel installed."
>>>>> You do not appear to have the sources for the 2.6.18-164.6.1.el5PAE
>>>>> kernel installed.
>>>>> exit 1
>>>>> make[1]: *** [modules] Error 1
>>>>> make[1]: Leaving directory `/usr/src/zaptel'
>>>>> make: *** [all] Error 2
>>>>> Failure: Unable to compile Zaptel 2
>>>>> Fatal error: Unable to install Asterisk!
>>>>> [root at test rc.d]#
>>>>>
>>>>>
>>>>>
>>>>>           
>>>> Hi Steve,
>>>>
>>>> Yes, I had the same problem that the kernel source code wasn't installed
>>>> when I did an ACID install a few months ago. But, this is easy to fix.
>>>> From a root prompt, just install the package using yum....A command
>>>> like:
>>>>
>>>>         yum install kernel-PAE-devel.i686
>>>>
>>>> Also, I'll upload my "cooked" 2.6.30.5 kernel tonight and send you a
>>>> link.
>>>> It should be easy enough to install...
>>>>
>>>> BTW, I seem to remember needing some other packages, too....But, I don't
>>>> recall which at the moment.
>>>>
>>>>
>>>>
>>>> 73, David kb4fxc
>>>>
>>>>
>>>>
>>>>
>>>>         
>>> I'm still at work, so I have to make this brief.
>>>
>>> It would be nice to know if a 'yum install kernel-PAE-devel'
>>> allows phase2.sh to run to completion successfully.
>>>
>>>
>>> Steve
>>> WA6ZFT
>>>
>>>
>>>
>>>
>>>       
>> Steve.. it certainly does work (manually using yum to grab the changed
>> source).
>>
>> Brought it up on the Quad core Intel system New (NVidia Motherboard).
>>
>> It's working... and just like you said.. still audio dropouts here & there.
>> All of the 4 cores is at less than 1% utilization.
>> I'm pretty sure asterisk only uses one core.
>>
>> :-)
>>
>>
>>
>>
>>
>>
>>     
> I made a change to the phase1.sh script to do the 'uname -r | grep PAE' and the install runs to completion on a non-PAE
> system. This script change has been uploaded to dl.allstarlink.org/installcd. Try re-installing from scratch on a PAE
> system and tell me if it works or not.
>
> Steve
> WA6ZFT
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
>
>   
The install from scratch worked great on the PAE capable machine.
Also in paying more attention to the install process the PAE kernel was 
installed to begin with (from the CD).
This will probably happen on any machine that has 4GB or ore ram installed.
Looks like you got it fixed!






-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.




More information about the App_rpt-users mailing list