[App_rpt-users] Node segfaulting help please

Stephen Rodgers hwstar at rodgers.sdcoxmail.com
Mon Oct 19 21:19:43 EDT 2009


Matt Beasant wrote:
> Ah thank you for such a speedy response Steve, much appreciated. Got them
> now!
> I found astinstall.sh and ran that ( on the basis it couldnt be any more
> broken than it was! ) and it has seemed to fix the problem.  I will leave
> this node on test overnight and see how it goes.
> 
> All my nodes are Acid nodes built from the latest release - I can see you
> guys have been hard at work with some exciting developments in the pipeline,
> judging from my rpt.conf file!!
> 
> I need to use the rxondelay on this node, to stop this ping-pong problem, is
> it straightforward to use and where do I put it in rpt.conf?
> 
> Thanks again,
> 
> Matt
> 
> 2009/10/20 <hwstar at rodgers.sdcoxmail.com>
> 
>>> From: Matt Beasant <g4rky at yahoo.co.uk>
>>> Date: 2009/10/19 Mon PM 03:48:29 PDT
>>> CC: app_rpt mailing list <app_rpt-users at qrvc.com>
>>> Subject: [App_rpt-users] Node segfaulting help please
>>>
>>> Hi all,
>>> I was wondering where the scripts for updating, taking down and bringing
>> up
>>> App_rpt are hiding on the new install.
>>>
>>> I built a new node recently ( well quite a few ) and I have two of them
>> that
>>> segfault when I try to run the "radio tune rxvoice" routine.
>>>
>>> I was going to try and reinstall remotely - is there any way of running
>> the
>>> installation phase scripts remotely?
>>>
>>> Thanks in advance for any help received,
>>>
>>> Matt
>>> G4RKY
>>>
>>>
>> phase1.sh and phase2.sh cannot be run remotely. They are only part of the
>> install process. astupd.sh is the script
>> you want to run, but if your system(s) are not ACID version 0.9 then you'll
>> have to re-install from scratch. The script will refuse to do an update if
>> the versions don't match.
>>
>> The helper scripts are located in:
>> /usr/local/sbin and that should be part of the path.
>>
>> If it still segfaults after installing ACID 0.9, then you might want to
>> compare configs against working and non-working nodes to see what usbradio
>> setting(s) is causing the problem. There could be an unreported bug in
>> chan_usbradio.c
>>
>> Steve
>> WA6ZFT
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at qrvc.com
>> http://qrvc.com/mailman/listinfo/app_rpt-users
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at qrvc.com
>> http://qrvc.com/mailman/listinfo/app_rpt-users
>>
>>
> 

usbradio.conf:

[general]
.
.
.
rxondelay=xx	  ; number of 20ms intervals to hold off receiver turn-on
indication
.
.
.



Steve
WA6ZFT




More information about the App_rpt-users mailing list