[App_rpt-users] Feature request(s)

Tim Sawyer tim.sawyer at mac.com
Fri Oct 23 08:35:20 EDT 2009


That is already there for usb dongles. From the sample usbradio.conf:

txtoctype=notone	; Transmit tone control type: no,phase,notone
			; no - CTCSS tone encoding with no hang time
			; phase - encode CTCSS and reverse phase
			; AKA ("reverse burst") before unkeying TX
			; notone - encode CTCSS and stop sending tone before unkeying TX
			; AKA ("chicken burst")

--
Tim
:wq

On Oct 22, 2009, at 10:36 PM, Steve Gladden wrote:

I know it's so much easier to ask for features than it is to build  
them ;-)
But while we're at it here's a really nifty one I've always liked that
Motorola & GE
radios have had for years..

( CTCSS reverse burst aka STE Squelch Tail Elimination)

http://www.repeater-builder.com/rbtip/reverseburst.html

I might even work at this myself sometime..
It's not a very important feature it's just a nifty one.
Just thought I'd throw the idea out there for fun..
Also if any folks are not familiar with this that's a good like to  
check out
and learn a tidbit about it.

I've also been spoiled for a long time using Motorola stuff and not ever
hearing a squelch tail :-)

Steve.





hwstar at rodgers.sdcoxmail.com wrote:
> See comments interspersed below.
>
> Steve
> WA6ZFT
>
>> From: "Scott Weis" <kb2ear at kb2ear.net>
>> Date: 2009/10/22 Thu AM 10:10:23 PDT
>> To: "app_rpt users list" <app_rpt-users at qrvc.com>
>> Subject: [App_rpt-users] Feature request(s)
>>
>> Hi All,
>>
>> I have a few feature requests. They are:
>>
>> 1). Output CTCSS only when valid input present (Local or remote),  
>> not during
>> hang time, ID's etc.
>>
>
> This will have to be revisited after we gain the ability to change  
> CTCSS tones to app_rpt. There's no way for app_rpt.c to do change  
> CTCSS tones dynamically because XPMR/chan_usbradio.c does not  
> support this yet. There is an open Mantis feature request to add  
> this ability to chan_usbradio/XPMR, but this work will have to be  
> done by Jim, WB6NIL, and Steve Henke W9SH as I am not cognizant of
> the internal workings of this code.
>
>
>
>> 2). Initial ID. After timer expires due to inactivity it gives a  
>> different
>> ID than the normal 10 minute ID. (ex: Welcome to the XYZ repeater,  
>> PL 123.4
>> instead of CWID or other Voice ID)
>>
>
> Please log as a feature request on http://mantis.qrvc.com.
> You'll need to sign up for an account if you don't alreay have one.  
> Suggested title: Add Separate Clean Up ID Message
>
>
>> 3). Some way to insert a pause in to macros.
>>
>
> Why is this needed? What problem are you trying to resolve?
>
>
>> Thanks in advance.
>>
>> 73 de
>> Scott KB2EAR
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at qrvc.com
>> http://qrvc.com/mailman/listinfo/app_rpt-users
>>
>>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
>
>


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

_______________________________________________
App_rpt-users mailing list
App_rpt-users at qrvc.com
http://qrvc.com/mailman/listinfo/app_rpt-users




More information about the App_rpt-users mailing list