[App_rpt-users] Quad PCI Radio setup

Iñaki Civico icivico at gmail.com
Fri Oct 23 16:45:39 EDT 2009


Ops, i'm sorry, i missed that directory.
Thank you very much, Tim

Tim Sawyer wrote:
> I found a sample in /usr/src/configs/pciradio
>
> Here's my zaptel.conf
>
> tx=1000       
> ctcss=1000,1,1000
> invertcor=y
> debouncetime=10
> exttone=n
> channels=1
>
> tx=1000
> ctcss=1000,1,1000
> invertcor=n
> debouncetime=10
> exttone=n
> channels=2
>
> be sure to do a "ztcfg -v" after edit...
>
> Zaptel Version: 1.4.12.1RPT_A
> Echo Canceller: MG2
> Configuration
> ======================
>
>
> 2 channels to configure.
>
>
> -- 
> Tim
> :wq
>
> On Oct 23, 2009, at 12:33 PM, Iñaki Civico wrote:
>
> Hi all,
> i'm installing a system with Quad Radio card, but i can't find any
> documentation about zaptel.conf and zapata.conf files for this card.
> All seems to start ok but when i call rpt(${NODE}) i get this message:
> "rpt:Sorry unable to obtain Rx channel"
>
> In rpt.conf, rxchannel is Zap/1 and txchannel is Zap/2.
>
> I've followed zaptel.conf comments and configured channels=1-4
>
> # cat /proc/zaptel/2 shows this:
> Span 2: PCIRADIO/0 "Board 1"
>
>       1 PCIRADIO/0/0
>       2 PCIRADIO/0/1
>       3 PCIRADIO/0/2
>       4 PCIRADIO/0/3
>
> (Span 1 is ZTDUMMY)
>
>
> I don't know if channels in zapata.conf must be configured with any
> signalling type as with other cards like tdm400 or so.
>
> Can anybody help me or send any working example?
>
> Thanks in advance,
> /Iñaki Civico
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
>
>




More information about the App_rpt-users mailing list