[App_rpt-users] chan_tlb - Cross-Talk Issues

"Jeremy R. Geeo [KDØEAV]" kd0eav at clear-sky.net
Tue Dec 7 16:55:33 EST 2010


I've been working on setting up two TLB conferences that I wish to 
bridge over into two Allstar Link nodes ...

I've been successful at attaching both of the conferences to their two 
separate Allstar nodes. My intention is to have them run exclusively of 
each other - with the ability to bridge the Allstar nodes together as 
needed.

They are currently spread between two servers (and 3 IP addresses)...

_*____Server 1_________________*_
Allstar 27097
Allstar 27521
TLB - Echolink *KD0EAV* (attached to 27097)


_*____Server 2_________________*_
TLB - Echolink *MISSOURI* (attached to 27521)


The issue is that when I have both 27097 and 27521 on the same server, 
ANY traffic from 27097 will appear on the *MISSOURI* conference (only 
attached to 27521)... and  any traffic on 27521 will appear on *KD0EAV* 
(only attached to 27097)... even though they ARE NOT in ANY WAY bridged 
together. BUT - this is only true for traffic which is on the AllStar 
side of things... if somebody responds to me on the TLB conference it is 
NOT routed back over. It only flows one way... FROM Allstar TO TLB... It 
shows in TLB to be from the other Asterisk node.




_*____Server 1 Allstar tlb.conf_______*_
[tlb0]
call=Allstar 27097      ; Call of the app_rpt station
port=44966              ; Start of UDP port range (this port, port + 1)
astnode=27097           ; app_rpt node associated with this instance 
(for incoming connections)
context=radio-secure    ; Asterisk context for incoming connections
codec=GSM               ; Default CODEC to be used
ipaddr=208.110.93.103   ; Bind2IP address

[tlb1]
call=Allstar 27521      ; Call of the app_rpt station
port=44968              ; Start of UDP port range (this port, port + 1)
astnode=27521           ; app_rpt node associated with this instance 
(for incoming connections)
context=radio-secure    ; Asterisk context for incoming connections
codec=GSM               ; Default CODEC to be used
ipaddr=208.110.93.103   ; Bind2IP address

[nodes]
1424491 = *KD0EAV*,208.110.93.108,44966
1452514 = *MISSOURI*,216.229.80.7,44968




_*____Server 1 TLB tlb.conf__________*_
Bind2IP = 208.110.93.108
RTP_Port = 44966
StartupCmd = connect -r -n -f -p 44966 208.110.93.103



_*____Server 2 TLB tlb.conf__________*_
Bind2IP = 216.229.80.7
RTP_Port = 44968
StartupCmd = connect -r -n -f -p 44968 208.110.93.103



Thanks for all your work on this!! It held up to quite a lot of abuse 
last night....

73

- Jeremy, KD0EAV

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20101207/dc7bacd7/attachment.html>


More information about the App_rpt-users mailing list