[App_rpt-users] dtmf decode during phone patch up not working
george at dyb.com
Tue Dec 28 08:08:31 EST 2010
That's what I was trying. If the patch is down it decodes, I can see it on
the CLI. But if the patch is up, after *6 and getting only dial tone, it
will not decode.
----- Original Message -----
From: "Ken" <ke2n at cs.com>
To: "'George Csahanin'" <george at dyb.com>; "'KB3ORS - Brian'"
<kb3ors at windstream.net>; <app_rpt-users at ohnosec.org>
Sent: Monday, December 27, 2010 10:44 PM
Subject: RE: [App_rpt-users] dtmf decode during phone patch up not working
> On mine, it takes #0 to drop the dial tone (just # will not do it. I
> this is the default behavior).
> Of course, thanks to this:
> 0=autopatchdn ; Autopatch down
> *0 will also bring down the patch - have you tried that??
> (using version 0.267)
>> -----Original Message-----
>> From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-
>> bounces at ohnosec.org] On Behalf Of George Csahanin
>> Sent: Monday, December 27, 2010 8:27 PM
>> To: KB3ORS - Brian; app_rpt-users at ohnosec.org
>> Subject: Re: [App_rpt-users] dtmf decode during phone patch up not
>> Sorry, I thought it was standard.
>> Should dump the patch
>> From rpt.conf:
>> 6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
More information about the App_rpt-users