[App_rpt-users] Kenwood Remote TRX

Jim Duuuude telesistant at hotmail.com
Mon Mar 8 18:24:26 EST 2010

Yes the D700A just needs a serial cable (although it needs to be
female-female straight thru, cause they used the wrong sex connector
on the Kenwood radio). Yep 9600 baud packet mode is perfict. You will
need to feed the URI output through the 2X amplifier since the Kenwood
takes boat-loads of audio to modulate it properly. Set carrier detect
and rxctcss to dsp and txmixa to voice. The radio makes its own CTCSS
on transmit.

I believe the V7 is the same as the TMG707 so it needs the magic circuitry.

> From: jann at gmx.de
> To: app_rpt-users at qrvc.com
> Date: Tue, 9 Mar 2010 00:08:02 +0100
> Subject: [App_rpt-users] Kenwood Remote TRX
> Hi,
> I have seen in svn revision 565 of app_rpt.c the new "support for Kenwood
> TM-D700A as a remote". Do we need a special interface (like the TM-G707
> needs) or can we simply use a serial cable? Does the dedicated DATA
> connector in 9600bps Packet Radio mode fit our needs for "flat" audio? Where
> can I find the informations which has been required to implement this
> feature?
> I have another radio from Kenwood (TM-V7) and a selfmade programming cable
> for the memory store. Could this be another transceiver for a remote
> controlable station?
> Tnx,
> 73,
> Jann
> --
> Jann Traschewski, Drosselstr.1, D-90513 Zirndorf, Germany
> Tel.: +49-911-696971, Mobile: +49-170-1045937, E-Mail: jann at gmx.de
> Ham: DG8NGN / DB0VOX, http://www.qsl.net/dg8ngn, ICQ UIN: 4130182
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users

More information about the App_rpt-users mailing list