[App_rpt-users] Using CTCSS to send commands to app_rpt

Jim Duuuude telesistant at hotmail.com
Mon Mar 22 23:08:26 EDT 2010


[tonemacro]
100.0=*7



----------------------------------------
> Date: Mon, 22 Mar 2010 22:18:00 -0400
> From: wa1sot at pcom.com
> To: App_rpt-users at qrvc.com
> Subject: Re: [App_rpt-users] Using CTCSS to send commands to app_rpt
>
> Jim,
>
> Any pointers in how to use tonemacro? I looked for documentation but only
> found that it has not been documented yet. I also looked at the source
> code and config files and was not able to figure out how to configure
> tonemacro.
>
> Thank you for all the work you have done on this excellent software,
>
> Jim WA1SOT
>
>
>>
>> been there, done that, got the t-shirt.
>> use the '[tonemacro]' section of rpt.conf.
>>
>> JIM
>>
>> ----------------------------------------
>>> Date: Mon, 22 Mar 2010 20:34:25 -0400
>>> From: wa1sot at pcom.com
>>> To: App_rpt-users at qrvc.com
>>> Subject: [App_rpt-users] Using CTCSS to send commands to app_rpt
>>>
>>> Since we are discussing non DTMF methods of sending commands, I'd like
>>> to
>>> mention that the ability to send a command by changing CTCSS tone would
>>> be
>>> useful for me as I do not have a DTMF microphone but I can program a
>>> different CTCSS into the radio to send a command. While you are looking
>>> at the code please keep my request in mind. Thanks in advance, Jim
>>> WA1SOT
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at qrvc.com
>>> http://qrvc.com/mailman/listinfo/app_rpt-users
>>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
 		 	   		  


More information about the App_rpt-users mailing list