[App_rpt-users] Can you connect to a node just on the lan? (multihome? how?)

Jim Duuuude telesistant at hotmail.com
Wed May 12 23:52:05 EDT 2010


you really dont need to have any of the additional stuff in the iax.conf file.
In each node, you just need to have the other's local RFC-1918 address
in the [nodes] section of rpt.conf. That overrides the external file.

JIM WB6NIL

> Date: Wed, 12 May 2010 14:17:50 -0400
> From: steve at michiganbroadband.com
> To: Sysman at Xceptions.COM
> CC: stevegladden at michiganbroadband.com; app_rpt-users at qrvc.com
> Subject: Re: [App_rpt-users] Can you connect to a node just on the lan? (multihome? how?)
> 
> Thanks Paul!
> 
> Very helpful! I'd like to add this to the standard documentation
> exactly as you put it if possible..
> Unless nobody else really does this :-)..
> This is great.. I can continue testing now without annoying anyone
> else's live nodes with my rigorous testing now. :-)
> 
> + I might link two nodes over a wireless LAN in Dayton this weekend!
> 
> 
> Steve
> 
> 
> 
> 
> 
> 
> 
> 
> 
> > Yes this is how my hub and node are configured.
> >
> > #1:  Ensure that both nodes see their internal address in the node stanza
> > as indicated below.
> >
> > Radio 1: 27084 = radio at 10.15.0.249/27084,NONE
> > Radio 2: 2598 = radio at 10.15.0.250/2598,NONE
> >
> > #2:  For good measure so you can connect with each other, insure that you
> > have a peer entry in the iax.conf file for both nodes' internal addresses.
> >
> > Radio 1:
> > [WINSLink-HI]
> > type=peer
> > host=10.15.0.250
> > secret=xxxxx
> > auth=md5
> > disallow=all
> > allow=ulaw
> > allow=alaw
> > transfer=no
> >
> > Radio 2:
> > [vmAsterisk]
> > type=peer
> > host=10.15.0.249
> > secret=xxxxxx
> > auth=md5
> > disallow=all
> > allow=ulaw
> > allow=alaw
> > transfer=no
> >
> > The entry into each node stanza on the 'rpt.conf' file will override the
> > public database that is being updated from the allstar server while, still
> > allowing outside connections based on your public IP address if you are
> > connected to the internet.
> >
> > _______________________________
> > Paul J. Agamata
> > Sysman at Xceptions.COM
> > Hilo, Hawaii
> >
> > [cid:3356425690_4952136]
> >
> >
> > ________________________________
> > From: Steve Gladden <steve at michiganbroadband.com>
> > Date: Tue, 11 May 2010 11:57:59 -1000
> > To: Steve Gladden <stevegladden at michiganbroadband.com>
> > Cc: <app_rpt-users at qrvc.com>
> > Subject: Re: [App_rpt-users] Can you connect to a node just on the lan?
> > (multihome? how?)
> >
> >
> >
> >> On Sat, 8 May 2010, Steve Gladden wrote:
> >>
> >>> I've got two nodes:
> >>>
> >>> 2586 and 27036
> >>>
> >>> Both sit on the same LAN.
> >>>
> >>> Is it possible to connect one to the other (link) them
> >>> over the LAN while they are still reachable from the
> >>> Internet via ALLSTAR public node list
> >>>
> >>> You can see my attempt below that is failing across the LAN.
> >>> I don't know if it is failing because the same node number
> >>> is also in the public IP/ public nodelist.
> >>>
> >>> Is there a way to 'locally' override the public node list
> >>> so it's number is reachable 'locally' via lan or VPN?
> >>>
> >>> Or do local type nodes need to not also register with ALLSTAR LINK?
> >>>
> >>> In this example I'm trying to make outbound link to node
> >>> 2586 which is at 10.73.73.9 internally..
> >>>
> >>> Back on node 27036 in it's config I of course am pointing
> >>> back to 2586 at it's internal IP (not shown here).
> >>> Thanks! -Steve
> >>>
> >>>
> >>> 27036 = radio at 127.0.0.1/27036,NONE      ; This must be changed to your
> >>> node number
> >>>
> >>> 2586 = radio at 10.73.73.9/2586,NONE
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> Michigan Broadband Systems Inc.
> >>> "Always Connected"
> >>>
> >>> (734)527-7150
> >>>
> >>> Steve's cellphone: (734)904-1811
> >>>
> >>>
> >>>
> >> BUMP: Please & Thank You..
> >>
> >> I'd like to link my two nodes over the local network and have almost
> >> got it but not quite...
> >> Am I missing a step or concept here?
> >>
> >> Can I multihome an Internet registered node locally? as you see me
> >> attempting above?
> >>
> >> Or can a node have two simultaneous identities? one for the LAN
> >> and another for registering with Allstar Link?
> >>
> >> -Steve
> >
> > Anyone ever done this?
> > I'm trying to get it working for Dayton if possible.
> > -Steve
> >
> >
> >
> >
> >
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean.
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at qrvc.com
> > http://qrvc.com/mailman/listinfo/app_rpt-users
> >
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean.
> >
> >
> 
> 
> Michigan Broadband Systems Inc.
> "Always Connected"
> 
> (734)527-7150
> 
> Steve's cellphone: (734)904-1811
> 
> 
> -- 
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20100512/56b420b3/attachment.html>


More information about the App_rpt-users mailing list