[App_rpt-users] Maxtrac as a remote base
kt9ac at ameritech.net
Wed Sep 29 12:20:09 EDT 2010
Thanks Jim for entertaining and working on the new and undiscovered
The GM300 series of radios will do channel-steering, by using a BCD
design of up to five bits to select between 32 modes. I don't recall if
the Maxtrac's will do that, but its certainly something that could be
linked back into a macro, etc.
On 09/29/2010 11:11 AM, Jim Duuuude wrote:
> That's an interesting question. Obviously the USB device has a couple
> of outputs on
> it that certainly could be accessed by the chan_usbradio and/or
> modules and controlled through app_rpt. The URI was also designed with
> this in
> mind, being that we brought all the outputs out to the connector.
> In nearly 10 years that this project has been going on, you are the
> FIRST person to
> even ask this question or show any interest in using these outputs.
> This is the main
> reason why I never bothered to implement this functionality.
> Sure, it can be done. Yeah, Ill work on this. Heck, even if you're the
> only person that
> ever uses it, at least you can benefit from the work involved.
> JIM WB6NIL
> > Date: Wed, 29 Sep 2010 10:05:21 -0400
> > From: n3fe at repeater.net
> > To: app_rpt-users at qrvc.com
> > Subject: [App_rpt-users] Maxtrac as a remote base
> > I have been up and running now for about a month. I have added a
> > maxtrac radio to use as a remote base. On my other controllers I would
> > pulse a line to ground momentarily to move the channel up or down. I
> > have done some reading and I haven't seen anything that talks about
> > app_rpt doing this.
> > Does asterisk/app_rpt have the ability to work with outputs? What would
> > need to be done to be able to do something like this if something isn't
> > already in place for it?
> > Corey N3FE
> > --
> > This message was scanned and is believed to be clean.
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at qrvc.com
> > http://qrvc.com/mailman/listinfo/app_rpt-users
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the App_rpt-users