[App_rpt-users] Echolink announcements.

Jon Rorke jrorke at cogeco.ca
Mon Jan 17 11:33:13 EST 2011


Well, I dont have any Echolink on any of my nodes and I would like to 
disable all echolink connect and disconnect messages (on my end) that 
may come through when a node that does have echolink is connected. to mine.

I'm not anti Echolink, but I find that people on echolink tend to 
connect to nodes, monitor for 1 nano second, and if they don't hear 
anything disconnect. What happens on the other end (my end) is 5 minutes 
of connect message and then 5 minutes of disconnect messages!

So my vote is to make it work as described, that way it will be up to 
the node owner to customize as required.

Jon

On 1/17/2011 11:17 AM, Jim Duuuude wrote:
> excellent point. Well, should I change the documentation to match the 
> design, or change
> the design to match the documentation?
>
> JIM
>
> ------------------------------------------------------------------------
> From: kb2ear at kb2ear.net
> To: telesistant at hotmail.com; kb4fxc at inttek.net
> CC: app_rpt-users at ohnosec.org
> Subject: RE: [App_rpt-users] Echolink announcements.
> Date: Mon, 17 Jan 2011 11:08:33 -0500
>
> http://ohnosec.org/drupal/node/107
>
> eannmode
>
> 	
>
> 0 = do not announce Echolink nodes at all, 1 = announce only the node 
> number (Allstar-translated), 2 = announce only the call of the 
> echolink station, 3 = announce both
>
> 	
>
> 1
>
> echolinkdefault
>
> 	
>
> 0 = telemetry output off, 1 = telemetry output on, 2 = timed telemetry 
> output on command execution and for a short time thereafter, 3 = 
> follow local telemetry mode
>
> 	
>
> 2
>
> Thanks & 73,
>
> Scott KB2EAR
>
> *From:*Jim Duuuude [mailto:telesistant at hotmail.com]
> *Sent:* Monday, January 17, 2011 12:42 AM
> *To:* kb2ear at kb2ear.net; kb4fxc at inttek.net
> *Cc:* app_rpt mailing list
> *Subject:* RE: [App_rpt-users] Echolink announcements.
>
> Frankly, I wasnt aware that you were supposed to be able to turn them 
> off completely.
> Where did you get the idea that it does this??
>
> JIM
>
> ------------------------------------------------------------------------
>
> From: kb2ear at kb2ear.net
> To: telesistant at hotmail.com; kb4fxc at inttek.net
> CC: app_rpt-users at ohnosec.org
> Subject: RE: [App_rpt-users] Echolink announcements.
> Date: Sun, 16 Jan 2011 23:45:12 -0500
>
> I just installed it here. I now have callsigns again, but still can’t 
> turn of the announcements all together.
>
> Thanks & 73,
>
> Scott KB2EAR
>
> *From:*Jim Duuuude [mailto:telesistant at hotmail.com]
> *Sent:* Sunday, January 16, 2011 7:37 PM
> *To:* kb4fxc at inttek.net; kb2ear at kb2ear.net
> *Cc:* app_rpt mailing list
> *Subject:* RE: [App_rpt-users] Echolink announcements.
>
> Yep, there was a problem introduced a while ago. Im surprised no one 
> found it until now.
> The fixed version (app_rpt version 0.280) will be available from SVN 
> after 17:15 PST today.
>
> Thanks to everyone who helped point this out.
>
> JIM WB6NIL
>
>
> > Date: Sun, 16 Jan 2011 17:00:24 -0500
> > From: kb4fxc at inttek.net <mailto:kb4fxc at inttek.net>
> > To: kb2ear at kb2ear.net <mailto:kb2ear at kb2ear.net>
> > CC: app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>
> > Subject: Re: [App_rpt-users] Echolink announcements.
> >
> >
> > Hi everyone,
> >
> > I, too, noticed that echolink announcements went away after upgrading
> > recently....After looking through the app_rpt.c code, I found a "new"
> > variable that seems to need to be set, too. In the node stanza, try this:
> >
> > eannmode=2
> > tannmode=2
> >
> > ...This worked for me....Anyone know what "tannmode" is being used for??
> >
> > 73, David kb4fxc
> >
> >
> > On Sun, 16 Jan 2011, Scott Weis wrote:
> >
> > > Has anyone else noticed that the eannmode= and echolinkdefault= no 
> longer
> > > work? I have eannmode=0 and echolinkdefault=0 and still get echolink
> > > announcements. Also when eannmode=2 or 3 I do not get callsigns 
> anymore.
> > >
> > > Thanks & 73,
> > > Scott KB2EAR
> > >
> > > _______________________________________________
> > > App_rpt-users mailing list
> > > App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> > >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20110117/08cc56dd/attachment.html>


More information about the App_rpt-users mailing list