[App_rpt-users] Problem with app_rpt configuration and URI's audio interface
akalexandrov at gmail.com
Sat Jan 22 13:00:39 EST 2011
I built a node configuration with ACID system and URI from DMKEngineering.
After the import of the ACID/Asterisk/app_rpt configuration from
Allstarlink.org I connected the URI to my reg and install IAX client to the
The system work well from IAX clent through URI to the reg - when I send
audio or voice from IAX client to the reg through URI the reg transmit the
audio very well and clear.
The problem is that I can not send any audio signal from the REG to the IAX
client. Practically the audio from the REG go to the MIC_AC pin of URI and
after that dropped down.
Practically I have only one way audio communication: Iax client
->Asterisk-> app_rpt -> URI -> reg
Probably I use a wrong usbradio.conf configuration but have not idea where
to start looking for the problem.
I red in the mailing list content some similar cases and advices about URI
MIC interface problems and tried to use them but unfortunately without
I will be very grateful for any advice how to resolve the problem.
The configuration I use is the following:
URI hardware interface:
audio line output of the reg - to URI MIC_AC (pin 21)
microphone input of the REG - to LEFT_AC(pin 22)
PTT - to PTT pin of the URI (pin1)
the URI's usbradio.conf file look like this:
; Usbradio channel driver Configuration File
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the App_rpt-users