[App_rpt-users] aprs password for app_gps

Chuck Henderson rpt2 at chuck.midlandsnetworking.com
Sun Jan 23 05:53:15 EST 2011


I would like to set up my allstarlink system to report position information
to the aprs system.

Can someone tell me how to set up this password?  Also, are the default
server and port listed in the example below what should be used?
I have searched the aprs site and couldn't find who to request this
information from.

Chuck Henderson,  WB9UUS


>
> ; Configuration for app_gps
> ;
> [general]
>
> call = wb9uus-2   ; callsign (including SSID) for APRS purposes*password = 12345 ; Password for APRS-IS server for above callsign*
> comment = AllStar Node 27468 ; Text to be displayed associated with this station*server = second.aprs.net  ; APRS-IS server to report information to**port = 10151 ; port on server to send data*
> icon = r  ; A CAR (default)   Icon do be displayed for station on APRS display (see below)
> comport = /dev/ttyS0  ; Serial port for GPS receiver (specify this only if using GPS receiver)
> baudrate = 4800  ; Baud rate for GPS receiver (specify this only if using GPS receiver)
> ;debug = y ; set this for debug output
> freq=442.700  ; Display Frequency of station
> tone=107.2    ; CTCSS tone of station (0.0 for none)
> lat=40.508    ; Fixed (default) latitude in decimal degrees
> lon=-88.988   ; Fixed (default) longitude in decimal degrees
> elev=123.4    ; Elevation of Antenna in Meters (*NOT* HAAT)
> power=9       ; Power level (see below)
> height=5      ; Antenna Height in HAAT (see below)
> gain=8        ; Antenna Gain (see below)
> dir=0         ; Antenna Direction (see below)
>
> On Sat, Jan 22, 2011 at 10:30 PM, Jim Duuuude <telesistant at hotmail.com>wrote:
>
>>  There have (obviously) been some changes/improvements made to the
>> Echolink and APRS/GPS subsystems within app_rpt.
>>
>> Included in these is the ability for a node to report its "fixed" GPS
>> coordinates
>> to the APRS network, even if it does not have a GPS receiver connected.
>>
>> Please see the following:
>>
>> Setting up Echolink Connectivity
>> http://209.159.155.200/drupal/node/56
>>
>> Setting Up APRS and GPS Configuration
>> http://209.159.155.200/drupal/node/179
>>
>> Of course, the latest copies of app_gps and chan_echolink need to be
>> downloaded from the SVN.
>>
>> JIM WB6NIL
>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20110123/ecb4cab8/attachment.html>


More information about the App_rpt-users mailing list