[App_rpt-users] aprs password for app_gps
telesistant at hotmail.com
Sun Jan 23 11:13:51 EST 2011
The heck with all this confusion regarding APRS passwords!!
I just reverse engineered the password algorithm and will make
a password generator (and will also automatically generate a password
for Portal-generate configurations).
> Date: Sun, 23 Jan 2011 15:49:55 +0200
> From: yo3iiu at yo3iiu.ro
> To: rpt2 at chuck.midlandsnetworking.com
> CC: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] aprs password for app_gps
> The APRS-IS password could be generated using the callpass utility that
> comes with xastir.
> Bogdan - YO3IIU
> > I would like to set up my allstarlink system to report position
> > information
> > to the aprs system.
> > Can someone tell me how to set up this password? Also, are the default
> > server and port listed in the example below what should be used?
> > I have searched the aprs site and couldn't find who to request this
> > information from.
> > Chuck Henderson, WB9UUS
> >> ; Configuration for app_gps
> >> ;
> >> [general]
> >> call = wb9uus-2 ; callsign (including SSID) for APRS purposes*password
> >> = 12345 ; Password for APRS-IS server for above callsign*
> >> comment = AllStar Node 27468 ; Text to be displayed associated with this
> >> station*server = second.aprs.net ; APRS-IS server to report information
> >> to**port = 10151 ; port on server to send data*
> >> icon = r ; A CAR (default) Icon do be displayed for station on APRS
> >> display (see below)
> >> comport = /dev/ttyS0 ; Serial port for GPS receiver (specify this only
> >> if using GPS receiver)
> >> baudrate = 4800 ; Baud rate for GPS receiver (specify this only if
> >> using GPS receiver)
> >> ;debug = y ; set this for debug output
> >> freq=442.700 ; Display Frequency of station
> >> tone=107.2 ; CTCSS tone of station (0.0 for none)
> >> lat=40.508 ; Fixed (default) latitude in decimal degrees
> >> lon=-88.988 ; Fixed (default) longitude in decimal degrees
> >> elev=123.4 ; Elevation of Antenna in Meters (*NOT* HAAT)
> >> power=9 ; Power level (see below)
> >> height=5 ; Antenna Height in HAAT (see below)
> >> gain=8 ; Antenna Gain (see below)
> >> dir=0 ; Antenna Direction (see below)
> >> On Sat, Jan 22, 2011 at 10:30 PM, Jim Duuuude
> >> <telesistant at hotmail.com>wrote:
> >>> There have (obviously) been some changes/improvements made to the
> >>> Echolink and APRS/GPS subsystems within app_rpt.
> >>> Included in these is the ability for a node to report its "fixed" GPS
> >>> coordinates
> >>> to the APRS network, even if it does not have a GPS receiver connected.
> >>> Please see the following:
> >>> Setting up Echolink Connectivity
> >>> http://22.214.171.124/drupal/node/56
> >>> Setting Up APRS and GPS Configuration
> >>> http://126.96.36.199/drupal/node/179
> >>> Of course, the latest copies of app_gps and chan_echolink need to be
> >>> downloaded from the SVN.
> >>> JIM WB6NIL
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the App_rpt-users