[App_rpt-users] aprs password for app_gps

Jim Duuuude telesistant at hotmail.com
Sun Jan 23 19:42:33 EST 2011


it was!! :-)

> Date: Mon, 24 Jan 2011 00:27:16 +0200
> Subject: RE: [App_rpt-users] aprs password for app_gps
> From: yo3iiu at yo3iiu.ro
> To: telesistant at hotmail.com
> CC: yo3iiu at yo3iiu.ro; rpt2 at chuck.midlandsnetworking.com; app_rpt-users at ohnosec.org
> 
> The protocol is quite simple and the source for callpass is included in
> the xastir source. Though, reverse engineering it seems a lot more fun :)
> 
> Regards,
> Bogdan - YO3IIU
> 
> >
> > The heck with all this confusion regarding APRS passwords!!
> >
> > I just reverse engineered the password algorithm and will make
> > a password generator (and will also automatically generate a password
> > for Portal-generate configurations).
> >
> > JIM
> >
> >> Date: Sun, 23 Jan 2011 15:49:55 +0200
> >> From: yo3iiu at yo3iiu.ro
> >> To: rpt2 at chuck.midlandsnetworking.com
> >> CC: app_rpt-users at ohnosec.org
> >> Subject: Re: [App_rpt-users] aprs password for app_gps
> >>
> >> The APRS-IS password could be generated using the callpass utility that
> >> comes with xastir.
> >>
> >> Bogdan - YO3IIU
> >>
> >> > I would like to set up my allstarlink system to report position
> >> > information
> >> > to the aprs system.
> >> >
> >> > Can someone tell me how to set up this password?  Also, are the
> >> default
> >> > server and port listed in the example below what should be used?
> >> > I have searched the aprs site and couldn't find who to request this
> >> > information from.
> >> >
> >> > Chuck Henderson,  WB9UUS
> >> >
> >> >
> >> >>
> >> >> ; Configuration for app_gps
> >> >> ;
> >> >> [general]
> >> >>
> >> >> call = wb9uus-2   ; callsign (including SSID) for APRS
> >> purposes*password
> >> >> = 12345 ; Password for APRS-IS server for above callsign*
> >> >> comment = AllStar Node 27468 ; Text to be displayed associated with
> >> this
> >> >> station*server = second.aprs.net  ; APRS-IS server to report
> >> information
> >> >> to**port = 10151 ; port on server to send data*
> >> >> icon = r  ; A CAR (default)   Icon do be displayed for station on
> >> APRS
> >> >> display (see below)
> >> >> comport = /dev/ttyS0  ; Serial port for GPS receiver (specify this
> >> only
> >> >> if using GPS receiver)
> >> >> baudrate = 4800  ; Baud rate for GPS receiver (specify this only if
> >> >> using GPS receiver)
> >> >> ;debug = y ; set this for debug output
> >> >> freq=442.700  ; Display Frequency of station
> >> >> tone=107.2    ; CTCSS tone of station (0.0 for none)
> >> >> lat=40.508    ; Fixed (default) latitude in decimal degrees
> >> >> lon=-88.988   ; Fixed (default) longitude in decimal degrees
> >> >> elev=123.4    ; Elevation of Antenna in Meters (*NOT* HAAT)
> >> >> power=9       ; Power level (see below)
> >> >> height=5      ; Antenna Height in HAAT (see below)
> >> >> gain=8        ; Antenna Gain (see below)
> >> >> dir=0         ; Antenna Direction (see below)
> >> >>
> >> >> On Sat, Jan 22, 2011 at 10:30 PM, Jim Duuuude
> >> >> <telesistant at hotmail.com>wrote:
> >> >>
> >> >>>  There have (obviously) been some changes/improvements made to the
> >> >>> Echolink and APRS/GPS subsystems within app_rpt.
> >> >>>
> >> >>> Included in these is the ability for a node to report its "fixed"
> >> GPS
> >> >>> coordinates
> >> >>> to the APRS network, even if it does not have a GPS receiver
> >> connected.
> >> >>>
> >> >>> Please see the following:
> >> >>>
> >> >>> Setting up Echolink Connectivity
> >> >>> http://209.159.155.200/drupal/node/56
> >> >>>
> >> >>> Setting Up APRS and GPS Configuration
> >> >>> http://209.159.155.200/drupal/node/179
> >> >>>
> >> >>> Of course, the latest copies of app_gps and chan_echolink need to be
> >> >>> downloaded from the SVN.
> >> >>>
> >> >>> JIM WB6NIL
> >> >>>
> >> >>>
> >> >>>
> >> >>
> >> > _______________________________________________
> >> > App_rpt-users mailing list
> >> > App_rpt-users at ohnosec.org
> >> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >> >
> >>
> >>
> >> _______________________________________________
> >> App_rpt-users mailing list
> >> App_rpt-users at ohnosec.org
> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> 
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20110123/075e3709/attachment.html>


More information about the App_rpt-users mailing list