[App_rpt-users] manually issue COP command?

Tim Sawyer tim.sawyer at me.com
Tue Jan 25 11:08:46 EST 2011

You do not have to assign a dtmf. 

CLI> rpt cmd 2535 cop 1 0 

 The above command is a warm boot. 2535 is my node number. Notice the trailing 0 is needed to satisfy the command interpreter but has no meaning. 

Asterisk has command line help. Type "rpt cmd" and press enter will show options.


On Jan 24, 2011, at 9:02 PM, K&R Yoksh wrote:

> Hello,
> I'm wondering if there is a way to manually issue a COP command? I've tried to issue it from the CLI> prompt, but so far no luck..
> I have been working on my DTMF commands, and after the below commands didn't work, I wanted to check the syntax.. Is it possible, or do I have to assign a DTMF in rpt.conf, restart Asterisk, and retry?
> 1234 = cop,61,PP4=1      ; Turn on pp4
> Thanks. 73,
> Kyle
> K0KN
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20110125/f66cc1fc/attachment.html>

More information about the App_rpt-users mailing list