[App_rpt-users] manually issue COP command?

Jim Duuuude telesistant at hotmail.com
Wed Jan 26 08:02:20 EST 2011


Ok, I have the answer:

rpt cmd 2211 cop 61,pp4=1 0

JIM

From: yokshs at sbcglobal.net
To: telesistant at hotmail.com
Subject: Re: [App_rpt-users] manually issue COP command?
Date: Wed, 26 Jan 2011 00:40:15 -0600










No problem.. Any idea why I can't get the parallel 
port outputs to work with a COP?
 
Thanks. 73.
 
Kyle
K0KN

  ----- Original Message ----- 
  From: 
  Jim 
  Duuuude 
  To: yokshs at sbcglobal.net ; app_rpt mailing list 
  Sent: Tuesday, January 25, 2011 10:54 
  PM
  Subject: RE: [App_rpt-users] manually 
  issue COP command?
  
never mind... that was just a dumb suggestion. I wasnt paying 
  attention fully.
sorry



  
  From: telesistant at hotmail.com
To: yokshs at sbcglobal.net; app_rpt-users at ohnosec.org
Subject: 
  RE: [App_rpt-users] manually issue COP command?
Date: Tue, 25 Jan 2011 
  20:12:31 -0800


  
  
  How about 

rpt cmd 2211 
  cop 61 GPIO4=1

(since that's what would go in the line for a 
  DTMF function)

JIM



  
  From: yokshs at sbcglobal.net
To: app_rpt-users at ohnosec.org
Date: 
  Tue, 25 Jan 2011 13:57:28 -0600
Subject: [App_rpt-users] manually issue COP 
  command?


  

  Hi Tim (and the list),
  Thanks for the reply.. I have these entries in 
  usbradio.conf:
   
  pp3 = ptt
pp11 = cor
; pp10 = 
  in        ; in, cor or ctcss
; pp12 = 
  in        ; pins 10,12,13,15 are for 
  DTMF
; pp13 = in        
; pp15 = 
  in
pp4=out0      ; pins 4,5,6 are AUX 1,2,3, 
  default off
pp5=out0
pp6=out0

  My PTT and COS via the parallel port work 
  perfectly, but so far, the only success I've had controlling other 
  pins
  has been by assigning them to PTT.
   
  For example, as a test I set:
   
  pp3 = ptt
  pp4 = ptt
  pp5 = ptt
  pp6 = ptt
   
  This keys all 4 outputs any time PTT is called 
  for. I just wanted to make sure that app_rpt could control those pins.. 
  
   
  Besides that, I've had no success trying to use 
  COP 61 or 62 to control my pp4,5,6
   
  I've tried the syntax you suggested:
   
  rpt cmd 2211 cop 61 pp4=1
   
  I've also tried every other thing I could 
  think of, including:
   
  rpt cmd 2211 cop 61 pp4=1,0
  rpt cmd 2211 cop 61 pp4=1.0,0
  rpt cmd 2211 cop 62 pp4=32767
   
  73.
   
  Kyle
K0KN
  --- Original Message ---I've not played with this but my guess is... 

You in usbradio.conf you should put this in the [usb] stanza:
pp2=out0 ; set parallel port pin 2 to low output.
 
Then this should change it to high:
CLI>rpt cmd 2211 cop 61 pp2=1


Jim or others please jump in here if I have it wrong.
--
Tim
:wq

_______________________________________________ 
  App_rpt-users mailing list App_rpt-users at ohnosec.org 
  http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20110126/6f993ac6/attachment.html>


More information about the App_rpt-users mailing list