[App_rpt-users] Solid Tx after boot

Scott Weis kb2ear at kb2ear.net
Fri Mar 4 13:08:41 EST 2011

Are the green lights on the URIs blinking?

-----Original Message-----
From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of VE3GIH Gord Hewit
Sent: Friday, March 04, 2011 8:17 AM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Solid Tx after boot

We have a server that's been working well for several months, and it has
developed a new problem.  Every time the PC is booted, or asterisk is
restarted, we get constant transmit on all nodes.

The URI's show their red Tx light, and when I stop Asterisk, the
transmissions stop.  That indicates that the tx signal is coming from
Asterisk.   We can disconnect various receivers from the repeaters, and we
still get solid Tx, so I doubt this is a signal breaking squelch.  If we
unplug the URI's while this is happening, the Tx stops, but the node won't
work after that. 

I've restored an old working configuration, so I don't think it's anything
I've changed recently. 

Suggestions for troubleshooting this would be welcomed.   

VE3GIH Gord Hewit
416-779-3740 (mobile)

App_rpt-users mailing list
App_rpt-users at ohnosec.org

More information about the App_rpt-users mailing list