[App_rpt-users] Beagleboard URI issue: "device usb27674 currently not active"

Phil N6TCT phil.n6tct at gmail.com
Sat Mar 5 18:56:03 EST 2011

That did it!  Thanks!

Phil, N6TCT

On Sat, Mar 5, 2011 at 3:41 PM, Jim Duuuude <telesistant at hotmail.com> wrote:
> Dont run chan_usbradio on Pickle. Dont even have a usbradio.conf file in
> your directory.
> Try "susb active"
> and "susb tune." .. etc
>> Date: Sat, 5 Mar 2011 15:37:17 -0800
>> From: phil.n6tct at gmail.com
>> To: app_rpt-users at ohnosec.org
>> Subject: [App_rpt-users] Beagleboard URI issue: "device usb27674 currently
>> not active"
>> Gang, I would love whatever help your collective brains and experience
>> can provide on the following newbie problem.
>> I recently brought up a generic PC running ACID and a USB URI fob and
>> made it all work. Yay! Emboldened by my success :-) I thought I
>> would try getting my beagleboard running in a similar configuration
>> ... and so far, failed. The URI green LED blinks like it should when
>> asterisk starts. But asterisk CLI "radio key" and "radio unkey" don't
>> do anything (i.e., they do not turn on or off the URI fob's red LED).
>> Attempting to run "radio tune txvoice 500" generates the error "Device
>> usb27674 currently not active". (27674, of course, is the node number
>> for this system.) Running "radio active usb27674" does not give an
>> error but does not change anything (i.e., radio tune still fails with
>> the same error message).

More information about the App_rpt-users mailing list