[App_rpt-users] DMK URI Troubles

David McGough kb4fxc at inttek.net
Sun Mar 13 23:18:42 EDT 2011

Hi Adam,

I'm not sure if this may have anything to do with your situation, but,
I've encountered RFI issues in the past where the transmitter was
clobbering the URI, USB, PC, etc....I resolved with careful cable layouts
and clamp on ferrite chokes.

The URI "going nuts" when you transmit sounds suspiciously familiar-

73, David kb4fxc

On Sun, 13 Mar 2011, Pawlowski, Adam wrote:

> Sorry, I'm not seeing this cause it came back in the list digest.
> When the system is started the green light starts fla shing. Receive 
audio does come through. If I key transmit, say, by call ing in and 
dialing my node, or opening the tuning wizard, it will ke y for a variable 
amount of time, from almost 0 to maybe 3 or 4 seconds, then it goes dead, no lights.
> I'm re-installing ACID on a different machine, which, thus far, isn't segfaulting, so I'll see how it goes from there as well.
> Adam
> ----
> Message: 2
> Date: Fri, 11 Mar 2011 20:51:12 +0000
> From: Doug Hutchison <specialq.que at ntlworld.com>
> To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 25, Issue 14
> Message-ID: <4D7A8B40.2040305 at ntlworld.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> Ok, when you start the system, does the led on the URI blink?
> At what point does the URI stop...what steps are required to get it to
> the 'shutdown' state?
> D
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

More information about the App_rpt-users mailing list