[App_rpt-users] Overdriven dial tone on repeater - SOLVED

Ken ke2n at cs.com
Sun May 8 12:52:50 EDT 2011


This sound like it might be related to this
Are you using composite audio?

http://ohnosec.org/drupal/node/172

Ken



> -----Original Message-----
> From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-
> bounces at ohnosec.org] On Behalf Of Ed
> Sent: Sunday, May 08, 2011 12:31 PM
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] Overdriven dial tone on repeater - SOLVED
> 
> A while back, I inquired as to how I could have all of the other audio
> at reasonable levels, but the dial tone sounded over-deviated. I
> received a response that it was impossible to over-deviate on a dial
> tone if the repeater was tunes properly. A service monitor was just
> given to me, so the first thing I did was point a beam at the repeater
> and look at the signals.
> 
> I began by going through the procedures outlined on the website:
> http://ohnosec.org/drupal/node/48
> 
> While testing, I set the CTCSS level to 0, and when it transmitted, my
> handheld radio, set to require CTCSS, opened and I heard the repeater.
> 
> Soooooo, it sounded over-deviated because I had 2 tones being
> transmitted, in addition to the audio. One from Asterisk, and the other
> from the transmitter radio.
> 
> I thought it was interesting, and might help someone else later. All is
> well on the repeater now.
> 
> KI6PSP
> 
> Sent from my iPad
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users




More information about the App_rpt-users mailing list