[App_rpt-users] Trouble with my USB URI

Jim Duuuude telesistant at hotmail.com
Mon May 16 15:00:12 EDT 2011


Try downloading the uridiag program from:

http://svn.ohnosec.org/viewvc/projects/allstar/uridiag/trunk/?root=svn&view=tar

Un-tar it and 'make' it, then run './uridiag' and use option 'c' and it will
tell you how to make a connector for running the diagnostics.

This is the program that DMK uses to for production testing of a URI.

JIM WB6NIL


Date: Sun, 15 May 2011 23:11:58 -0400
From: craig.hastings at gmail.com
To: App_rpt-users at ohnosec.org
Subject: [App_rpt-users] Trouble with my USB URI


I had a note up and running well with not any real issues,  however after about 4-6 months,  the system no longer detected carrier on the cor line.

Sometimes it would think its always on and sometimes it would think its off.


I checked the voltage at the line from the radio  and that was working as it should.

I even reprogrammed the radio to try it voltage high instead of low for carrier.   This did not make any difference.

I have tried several radios Radius M100 CM300.  All work fine on the IRLP machine and all show proper voltage on the COS signal. 


I have the DMK URI with the eprom.   

Can anyone suggest any other diagnostics?  I would like to get the Node back up and running and/or order a replacement URI


Craig
VA3DTF





_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20110516/bb0610cf/attachment.html>


More information about the App_rpt-users mailing list