[App_rpt-users] Connecting to my node from web transceiver

Ken ke2n at cs.com
Fri Sep 23 19:46:56 EDT 2011


I can connect my Allstar node to yours, but I cannot connect to your node
with the my Web transceiver.
To me this would seem to point to a problem in the portal somehow - as if
your access setting was not working.


Ken


> -----Original Message-----
> From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-
> bounces at ohnosec.org] On Behalf Of Peter Dahl
> Sent: Friday, September 23, 2011 7:23 PM
> Cc: App_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] Connecting to my node from web transceiver
> 
> Ken,
> 	Yes, I have enabled User Access via Web Transceiver on the portal
> settings and the allstar-public stanza is present in both iax.conf and
> extensions.conf.
> 
> Peter
> 
> 
> On Sep 23, 2011, at 4:08 PM, Ken wrote:
> 
> > This works fine on my system
> >
> > Have you enabled "User Access via Web Transceiver" on the Access
> > Settings
> > menu of the Allstar Node Configuration at the portal?
> >
> > I find that I cannot connect to your system either.
> >
> > Does the iax.conf file on your repeater have a [allstar-public]
> > stanza?
> >
> > Does the extensions.conf file have a stanza of the same name?
> >
> > 73
> > Ken
> >
> >
> >> -----Original Message-----
> >> From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-
> >> bounces at ohnosec.org] On Behalf Of Michael Carey
> >> Sent: Friday, September 23, 2011 6:29 PM
> >> To: Peter Dahl
> >> Cc: App_rpt-users at ohnosec.org
> >> Subject: Re: [App_rpt-users] Connecting to my node from web
> >> transceiver
> >>
> >> Is there an "issue" using the web transceiver on the same internet
> >> service/connection that the node is on?  This is something I have
> >> wondered about but not ever tested.
> >>
> >> Michael.
> >> VK5ZEA
> >>
> >> On 24/09/2011 07:47, Peter Dahl wrote:
> >>> My node , 27595 appears to be fully operational now and ready to be
> >>> deployed on the air finally except I have one burning question. I
> >>> can
> >>> control and access my node both locally and through the phone
> portal
> >>> but not with the web transceiver. When I access most other nodes
> >>> through the web transceiver I am immediately connected to them and
> >>> the image of the keypad on the web page is active. When I access my
> >>> node through the web transceiver the "keypad" stays inactive and
> the
> >>> audible connection message does not  play. What am I missing? Can
> >>> someone please assist me with this final configuration of my node?
> >>>
> >>> Thanks in advance!
> >>>
> >>> Peter, WA7FUS,  Node 27595 Brier, WA
> >>> _______________________________________________
> >>> App_rpt-users mailing list
> >>> App_rpt-users at ohnosec.org
> >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>>
> >>
> >> _______________________________________________
> >> App_rpt-users mailing list
> >> App_rpt-users at ohnosec.org
> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users




More information about the App_rpt-users mailing list