[App_rpt-users] installation disk

Corey Dean n3fe at repeater.net
Thu Sep 29 12:37:49 EDT 2011


I can tell you it is blobbed but I could use these for remote receivers using the Xiapr install if it was supported.

I just pulled this out of my desk and reading it from backtrac.

ID 0c76:1607 JMTek, LLC. audio controller



Corey N3FE
________________________________________
From: app_rpt-users-bounces at ohnosec.org [app_rpt-users-bounces at ohnosec.org] On Behalf Of Andrew Errington [a.errington at lancaster.ac.uk]
Sent: Thursday, September 29, 2011 3:39 AM
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] installation disk

On Thu, 29 Sep 2011 03:17:01 Corey Dean wrote:
> These are the ones I ordered when I started in this.  I ordered 3 and a
> friend ordered some as well.  They were all the wrong chip.

What chip did you end up with?  Can you post the VID:PID please?  Is the chip
packaged (I/O pins accessible), or epoxy blobbed?

Sorry for so many questions, but I have been experimenting with a CM108
compatible chip for a related application.

73,

Andrew
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

--
This message was scanned and is believed to be clean.
Click here to report this message as spam.
http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=F3C582398.A75C6


More information about the App_rpt-users mailing list