[App_rpt-users] App_rpt-users Digest, Vol 46, Issue 20

Bob - AF6D bob at af6d.com
Wed Dec 12 17:53:45 EST 2012


I am completely new to Allstar and hope that you will excuse what some will
think is a stupid question.

We have three repeaters on the same pair that we wish to link together in a
voted simulcast configuration. I inquired about using our existing RC-210
controllers and was asked why I wanted to use a controller when Allstar can
do such a great job. I am sure it can but I am curious how we get our phone
patch and our weather receivers integrated, as well as RF links. As an ECOM
repeater service these are important to us. Simple is of course better but
like I said I am completely green.

I read that there is a piggy back device that allows the repeater to share a
controller with a RTCM -- is that still an option?

Thank you in advance.

-----Original Message-----
From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of
app_rpt-users-request at ohnosec.org
Sent: Wednesday, December 12, 2012 9:00 AM
To: app_rpt-users at ohnosec.org
Subject: App_rpt-users Digest, Vol 46, Issue 20

Send App_rpt-users mailing list submissions to
	app_rpt-users at ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
	app_rpt-users-request at ohnosec.org

You can reach the person managing the list at
	app_rpt-users-owner at ohnosec.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of App_rpt-users digest..."


Today's Topics:

   1. Re: More Newbie questions (Ken)


----------------------------------------------------------------------

Message: 1
Date: Wed, 12 Dec 2012 05:16:12 -0500
From: "Ken" <ke2n at cs.com>
To: "'Dave Miller'" <ve7pke at gmail.com>
Cc: App_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] More Newbie questions
Message-ID: <003b01cdd851$b7338550$259a8ff0$@cs.com>
Content-Type: text/plain;	charset="us-ascii"

Curious why you want Limey Linux -
I run a standard install on the D525 (and D510) without problems.

73

Ken


> -----Original Message-----
> From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-
> bounces at ohnosec.org] On Behalf Of Dave Miller
> Sent: Wednesday, December 12, 2012 2:55 AM
> To: App_rpt-users at ohnosec.org
> Subject: [App_rpt-users] More Newbie questions
> 
> Reading over the documentation it's still unclear if I can run Limey Linux
> download from Allstar link download page on a IntelD525 motherboard? And
> what steps do I need to follow? Do I need a running Linux system or can I
use
> an OSX machine to unpack the download from Allstar link page onto a USB
> drive or a memory card then put the card into the D525 motherboard? I am
> about to grab some hardware and jump in but not sure yet what I need to
> grab.
> 
> Many thanks
> Dave
> VE7PKE
> 
> Sent from my iPad
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users



------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


End of App_rpt-users Digest, Vol 46, Issue 20
*********************************************




More information about the App_rpt-users mailing list