[App_rpt-users] More questions on my first install.

Ken ke2n at cs.com
Thu Dec 20 21:47:18 EST 2012


Dave - It should work fine - High Fidelity even. 

I use both the D510 and D525 mobo's and they both work fine with iaxrpt
access.

 

I am using the ulaw codec (which I think is the default).

 

Choppy audio could be some problem on your network/router (or your PC is
really feeble)

 

At the CLI try: 

 iax2 show channels

 

Look at the lag and jitter for the "gui" username - I got 51 ms lag and 138
ms jitter (which varies)

 

Channel               Peer             Username    ID (Lo/Rem)  Seq (Tx/Rx)
Lag      Jitter  JitBuf  Format  FirstMsg    LastMsg

IAX2/gui-2516         69.243.53.147    gui         02516/09521  00076/00067
00051ms  0138ms  0179ms  ulaw    Rx:NEW      Tx:ACK

IAX2/192.168.1.111:4  192.168.1.111    radio       02784/03962  00225/00138
00076ms  0000ms  0040ms  unknow  Tx:NEW      Rx:ACK

IAX2/192.168.1.110:4  192.168.1.110    radio       03352/05225  00196/00222
00049ms  0003ms  0049ms  g726aa  Rx:NEW      Rx:ACK

IAX2/192.168.1.110:4  192.168.1.110    radio       05225/03352  00222/00196
00049ms  0009ms  0049ms  g726aa  Tx:NEW      Tx:ACK

IAX2/192.168.1.109:4  192.168.1.109    radio       05263/01118  00151/00194
00078ms  0000ms  0040ms  unknow  Tx:NEW      Rx:ACK

IAX2/192.168.1.109:4  192.168.1.109    radio       05990/02682  00182/00242
00076ms  0015ms  0055ms  g726aa  Tx:NEW      Rx:ACK

IAX2/192.168.1.109:4  192.168.1.109    radio       08371/03225  00111/00025
00077ms  0000ms  0040ms  unknow  Tx:NEW      Rx:ACK

IAX2/192.168.1.113:4  192.168.1.113    radio       10896/00837  00024/00060
00078ms  0002ms  0047ms  g726aa  Rx:NEW      Rx:ACK

IAX2/192.168.1.112:4  192.168.1.112    radio       15595/01296  00058/00064
00057ms  0000ms  0040ms  unknow  Tx:NEW      Tx:ACK

9 active IAX channels

 

Ken

 

 

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Dave Miller
Sent: Thursday, December 20, 2012 7:40 PM
To: App_rpt-users at ohnosec.org
Subject: [App_rpt-users] More questions on my first install.

 

I have got IAXRPT connecting to the Asterisk Server :D
But when I send it *73 command for instance the message I get back is choppy
and missing some of the audio.
I am running this on a Intel D525 Motherboard with ACID install. 
Is this expected?
Thanks
Dave

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20121220/d8958cea/attachment.html>


More information about the App_rpt-users mailing list