[App_rpt-users] Debugging COS
ke2n at cs.com
Sun Feb 12 06:57:08 EST 2012
core set verbose 7
for meaning of the signals
If you leave the COS on, you may time out the machine, which can lead to
And - if the machine wakes up with the COS on, I think that blocks the
transmit until you toggle it off once.
From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Jim Whiteside
Sent: Sunday, February 12, 2012 6:46 AM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Debugging COS
I'm still chipping away at modifying a Startech CM108 USB fob - so far I
have successfully got PTT and audio out working, but I'm struggling with
audio in and COS.
I've been following http://www.qsl.net/k0kn/cm108_mod.html
Can anyone advise if there's a way to determine from the Asterisk side if
COS is active or not?
I've even tried manually taking the CM108 pin 48 to 0v and +5v with the
iax.conf below, but I can't seem to make anything 'happen'.
My theory was, as soon as I have COS triggering Asterisk correctly, then I
can look at getting the audio in working properly.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the App_rpt-users