[App_rpt-users] RTCM Audio TX Audio Level.

Jim Duuuude telesistant at hotmail.com
Sun Feb 19 14:31:32 EST 2012


The same way you set tx audio level with any other kind of Allstar device.

Put the connected node into 1KHz test mode (cop,4), and tune for 3KHz
deviation out the tx @1KHz (plus level, usually about 700 Hz for CTCSS tone).

JIM WB6NIL

> From: conny at n5hc.com
> Date: Sun, 19 Feb 2012 10:25:22 -0700
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] RTCM Audio TX Audio Level.
> 
> Any best practice procedure to adjust the RTCM TX Audio Level in "General Purpose" mode and/or offline mode?
> 
> 73 de N5HC
> 
> /Conny
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20120219/ebf37703/attachment.html>


More information about the App_rpt-users mailing list