[App_rpt-users] Connection Timer?

REDBUTTON_CTRL jrorke at cogeco.ca
Sun Feb 26 08:26:59 EST 2012


For those codes to work you must add these lines in your rpt.conf file:

> So use the following:
>
> 950=ilink,7                             ; Node which last transmitted 
> to us
> 951=ilink,11                            ; Specific Link permanent 
> connect - Disconnect
> 952=ilink,12                            ; Specific Link permanent 
> connect - monitor only
> 953=ilink,13                            ; Specific Link permanent 
> connect - transceive
> 954=ilink,6                             ; Disconnect all links 
> including permalinks
>
> The above linking will connect reconnect if there is a drop in the 
> network. It will reconnect quietly.

Then reload rpt.conf  or stop asterisk and then restart asterisk so the 
changes will take effect. Then try them out.

*951node will link your node to the node specified. It will keep it 
connected. If your internet gets too slow or goes out it will 
automatically reconnect as soon as it possibly can.

Note: if you use the Perm connect command (*953node) you must use the 
Perm disconnect command (*951node) to break the link or *954.

The use of * 10 or *1node will not break this link. These commands only 
work on nodes connected with *3node.

Jon VA3RQ



On 2/26/2012 12:17 AM, Jim W7RY wrote:
> Those commands don't work. Any idea why?  *3 node works just fine.
> 73
> Jim W7RY
>
> *From:* David KE6UPI <mailto:dshaw at ke6upi.com>
> *Sent:* Saturday, February 25, 2012 1:02 PM
> *To:* Jim W7RY <mailto:w7ry at centurytel.net>
> *Cc:* app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>
> *Subject:* Re: [App_rpt-users] Connection Timer?
>
> *953 is to connect
> *951 is to disconnect
>
> On Sat, Feb 25, 2012 at 8:28 AM, Jim W7RY <w7ry at centurytel.net 
> <mailto:w7ry at centurytel.net>> wrote:
>
>     Or will *953 node be better...
>     I wish answers would be more clear on here for us un-experienced
>     users. (The same goes for the documentation)... Smile emoticon
>     Thanks
>     73
>     Jim W7RY
>
>     *From:* David KE6UPI <mailto:dshaw at ke6upi.com>
>     *Sent:* Saturday, February 25, 2012 7:43 AM
>     *To:* Jim W7RY <mailto:w7ry at centurytel.net>
>     *Cc:* app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>
>     *Subject:* Re: [App_rpt-users] Connection Timer?
>
>     Jim, No there is no timer. But if one of the nodes loses the
>     Internet then it will drop out with the uses of *3node. The only
>     timer is one the remote base nodes.
>
>     So use the following:
>
>     950=ilink,7                             ; Node which last
>     transmitted to us
>     951=ilink,11                            ; Specific Link permanent
>     connect - Disconnect
>     952=ilink,12                            ; Specific Link permanent
>     connect - monitor only
>     953=ilink,13                            ; Specific Link permanent
>     connect - transceive
>     954=ilink,6                             ; Disconnect all links
>     including permalinks
>
>     The above linking will connect reconnect if there is a drop in the
>     network. It will reconnect quietly.
>
>     David
>
>     i.e.
>     *950node
>
>
>
>     On Fri, Feb 24, 2012 at 10:15 PM, Jim W7RY <w7ry at centurytel.net
>     <mailto:w7ry at centurytel.net>> wrote:
>
>         Is there a connection timer hiding somewhere in my node?  I'm
>         having issues staying connected to the Win System node 2560.
>         If so, can someone please point me to it?
>         Thanks
>         73
>         Jim W7RY
>
>         _______________________________________________
>         App_rpt-users mailing list
>         App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>         http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>     No virus found in this message.
>     Checked by AVG - www.avg.com <http://www.avg.com>
>     Version: 2012.0.1913 / Virus Database: 2114/4829 - Release Date:
>     02/24/12
>
>
> No virus found in this message.
> Checked by AVG - www.avg.com <http://www.avg.com>
> Version: 2012.0.1913 / Virus Database: 2114/4831 - Release Date: 02/25/12
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20120226/0aa3f586/attachment.html>


More information about the App_rpt-users mailing list