[App_rpt-users] Connection Timer?

Scott Weis kb2ear at kb2ear.net
Mon Feb 27 15:49:04 EST 2012


cat /var/lib/asterisk/rpt_extnodes | grep yournodenumber

or within asterisk

asterisk -rx " iax2 show registry"

you should get back

67.215.233.178:4569   N       yournodenumber      youripaddress:4569
60  Registered

-----Original Message-----
From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Jim W7RY
Sent: Monday, February 27, 2012 12:47 PM
To: bdboyle at bdboyle.com; app_rpt mailing list
Subject: Re: [App_rpt-users] Connection Timer?

> It takes a while (10 min/20 min?) for your node to reregister with the 
> upstream server.  You shouldn't have to reboot; unless your ISP is
> (probably) assigning you a random IP address out of the DHCP (Dynamic 
> Host Configuration Protocol)

Nope. I have a static IP from the ISP.


pool they have, in which case, if your
> address changes at your end, then it has to re-propagate, again, upstream.
>
> It's not a bug, it's a feature, they say.  If your internet connection 
> is interrupted...just wait a few minutes.  Your node will reregister 
> with Jim's servers when it reconnects.

How do I find out if it's re-registered?


 Unless you have other issues in
> your network equipment that really aren't the fault of asterisk to 
> resolve.
>

Hard to tell. The ISP pipe is at the repeater site. Repeater site is 2 hour
drive one way.


>
>>
>> Thanks for all the help!
>> Jim W7RY
>>
>>
>>
>> --------------------------------------------------
>> From: "Corey Dean" <n3fe at repeater.net>
>> Sent: Sunday, February 26, 2012 8:18 AM
>> To: "Jim W7RY" <w7ry at centurytel.net>; "David KE6UPI" <dshaw at ke6upi.com>
>> Cc: <app_rpt-users at ohnosec.org>
>> Subject: RE: [App_rpt-users] Connection Timer?
>>
>>> Did you add them into your rpt.conf file?
>>>
>>> Corey N3FE
>>> ________________________________________
>>> From: app_rpt-users-bounces at ohnosec.org
>>> [app_rpt-users-bounces at ohnosec.org] On Behalf Of Jim W7RY
>>> [w7ry at centurytel.net]
>>> Sent: Sunday, February 26, 2012 12:17 AM
>>> To: David KE6UPI
>>> Cc: app_rpt-users at ohnosec.org
>>> Subject: Re: [App_rpt-users] Connection Timer?
>>>
>>> Those commands don't work. Any idea why? *3 node works just fine.
>>>
>>> 73
>>> Jim W7RY
>>>
>>>
>>> From: David KE6UPI<mailto:dshaw at ke6upi.com>
>>> Sent: Saturday, February 25, 2012 1:02 PM
>>> To: Jim W7RY<mailto:w7ry at centurytel.net>
>>> Cc: app_rpt-users at ohnosec.org<mailto:app_rpt-users at ohnosec.org>
>>> Subject: Re: [App_rpt-users] Connection Timer?
>>>
>>> *953 is to connect
>>> *951 is to disconnect
>>>
>>> On Sat, Feb 25, 2012 at 8:28 AM, Jim W7RY
>>> <w7ry at centurytel.net<mailto:w7ry at centurytel.net>> wrote:
>>> Or will *953 node be better...
>>>
>>>
>>> I wish answers would be more clear on here for us un-experienced
>>> users. (The same goes for the documentation)...
>>>
>>> Thanks
>>> 73
>>> Jim W7RY
>>>
>>>
>>> From: David KE6UPI<mailto:dshaw at ke6upi.com>
>>> Sent: Saturday, February 25, 2012 7:43 AM
>>> To: Jim W7RY<mailto:w7ry at centurytel.net>
>>> Cc: app_rpt-users at ohnosec.org<mailto:app_rpt-users at ohnosec.org>
>>> Subject: Re: [App_rpt-users] Connection Timer?
>>>
>>> Jim, No there is no timer. But if one of the nodes loses the Internet
>>> then it will drop out with the uses of *3node. The only timer is one
>>> the remote base nodes.
>>>
>>> So use the following:
>>>
>>> 950=ilink,7 ; Node which last transmitted to us
>>> 951=ilink,11 ; Specific Link permanent connect - Disconnect
>>> 952=ilink,12 ; Specific Link permanent connect - monitor only
>>> 953=ilink,13 ; Specific Link permanent connect - transceive
>>> 954=ilink,6 ; Disconnect all links including permalinks
>>>
>>> The above linking will connect reconnect if there is a drop in the
>>> network. It will reconnect quietly.
>>>
>>> David
>>>
>>> i.e.
>>> *950node
>>>
>>>
>>>
>>> On Fri, Feb 24, 2012 at 10:15 PM, Jim W7RY
>>> <w7ry at centurytel.net<mailto:w7ry at centurytel.net>> wrote:
>>> Is there a connection timer hiding somewhere in my node? I'm having
>>> issues staying connected to the Win System node 2560.
>>>
>>> If so, can someone please point me to it?
>>>
>>> Thanks
>>> 73
>>> Jim W7RY
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org<mailto:App_rpt-users at ohnosec.org>
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>>
>>>
>>> No virus found in this message.
>>> Checked by AVG - www.avg.com<http://www.avg.com>
>>> Version: 2012.0.1913 / Virus Database: 2114/4829 - Release Date: 
>>> 02/24/12
>>>
>>>
>>> No virus found in this message.
>>> Checked by AVG - www.avg.com<http://www.avg.com>
>>> Version: 2012.0.1913 / Virus Database: 2114/4831 - Release Date: 
>>> 02/25/12
>>>
>>> --
>>> This message was scanned and is believed to be clean.
>>> Click here to report this message as
>>>
spam.<http://simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=126011FA8.A904
3>
>>>
>>>
>>>
>>>
>>> -----
>>> No virus found in this message.
>>> Checked by AVG - www.avg.com
>>> Version: 2012.0.1913 / Virus Database: 2114/4832 - Release Date: 
>>> 02/25/12
>>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>
>
> -- 
> Bryan
> In this world, you must be oh so smart or oh so pleasant.
> Well, for years I was smart. I recommend pleasant.
> You may quote me.
>
> Sent from my MacBook Pro.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.1913 / Virus Database: 2114/4834 - Release Date: 02/26/12
> 
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users





More information about the App_rpt-users mailing list