[App_rpt-users] USB Soundcard Fob - no audio

Steve Passmore k6kya at hokeynet.net
Sat Jan 7 05:02:23 EST 2012

I don't think this is your problem since the green led is flashing but 
make sure you've updated to the latest SVN

On 1/6/2012 3:34, Jim Whiteside wrote:
> I'm working hard to get a basic AllStar system running, and struggling
> to find a suitable USB Fob to modify (trying to do it on a budget)
> I've been unable to get hold of the exact model shown in
> www.qsl.net/kb9mwr/projects/voip/usbfob-119.pdf, but now have several
> of a very similar one with the printed description 'Virtual 7.1Ch
> Sound' and a slightly translucent case.
> lsusb reports the device as 'ID 0d8c:000c C-Media Electronics, Inc.
> Audio Adapter.' which I think might be CM119 or similar.
> When plugged in the green led starts to flash, but I've not yet been
> able to get any audio out of it - even when running 'rpt fun<node>
> *80' from the Asterisk CLI
> I wanted to confirm this was a suitable fob before going to the grief
> of modifying - it's much more SMT than in the above PDF, and you can't
> actually access the pins on the chip itself as it's under a 'bubble'
> of a ceramic compound.
> Any advice would be gratefully received.

More information about the App_rpt-users mailing list