[App_rpt-users] getting started trouble

Jim Kehler kh2d at bellsouth.net
Mon Jan 30 23:03:19 EST 2012


I saw an "Autocongesting" message when I had another node's IP address 
configured
wrong in RPT.CONF. I couldn't connect to him but he could connect to me 
no problem.

73, Jim KH2D


On 1/30/2012 7:51 PM, Robert Poff wrote:
> I've had a few email exchanges with Steve this afternoon.
> I believe his trouble with the Web Transceiver is related to outside 
> nodes not being able to connect inbound and stay connected.
>
> >From my nodes, when I try to connect to his, I get a connect and an 
> almost immediate disconnect with this message from the CLI:
> /[Jan 30 19:38:11] NOTICE[2583]: chan_iax2.c:4071 __auto_congest: 
> Auto-congesting call due to slow response/
>
> However, he can connect to me and stayed connected for about twenty 
> minutes, until he told it to disconnect.
>
> If I ping the address I get from /tmp/rpt_extnodes-temp for his node I 
> get quick response.
> So he's registering. And receiving the rpt-extnodes-temp file.
>
> He sent me the results from rpt stats 28325 and incoming connections 
> are allowed.
>
> He says the correct ports are forwarded in his router.
>
> Any suggestions?
>
> -- 
> /Robert A. Poff/
> /Loganville, PA/
>
> WB3AWJ/- Allstar 27784/
> /Powered by Linux/
>
> On Mon, 2012-01-30 at 13:41 -0500, Stephen Liggett wrote:
>> I am transitioning our repeater from IRLP to ALLSTAR and I am having some trouble.
>>
>> I installed ACID, and it went without any trouble.
>>
>> With the URI connected, the green light blinks.
>>
>> I can ping yahoo.com, and I have ports 4569 and 222 forwarded.
>>
>> As it stands, the node (28325, W3YT) shows up on the web transceiver in green, but nobody seems to be able to connect to it.
>>
>> nscheck.sh gives an output of Node 1, Node 2 are up, node 3, node 4 are down (whatever that means).
>>
>> I do not have the repeater connected, but I assume that one should be able to connect to the node, regardless of whether there is anything connected to the URI.
>>
>> It seems to me that I am missing something here. Can someone get me past this?
>>
>>
>>
>> steve W3RX trustee for W3YT repeater IRLP 8676 Allstar 28325
>>
>>
>>
>> PS Minor question, on my node info, I somehow never saw the chance to put in the freq, tone, and description of the repeater. Can that be done now?
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org  <mailto:App_rpt-users at ohnosec.org>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20120130/b3b12f04/attachment.html>


More information about the App_rpt-users mailing list