[App_rpt-users] Node radio

Doug Bade kd8b at thebades.net
Wed Mar 21 13:26:09 EDT 2012


I would suspect any radio with a packet jack can be used. 

Packet data input is equivalent to raw unprocessed TX audio 

PTT is PTT

Ground is Ground

9600 packet data out would be RX discriminator audio

Squelch is COR but not needed.

 

You will probably need to tailor the audio in Allstar to get the audio
sounding right with tx pre-emphasis etc..

 

Doug

KD8B

 

 

 

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Ken Robinson
Sent: Wednesday, March 21, 2012 12:43 PM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Node radio

 

Hi,

I'm in the process of setting up an Allstar node using a USB fob and when I
get one an ex PMR radio.

At the moment on my Echolink node I'm using a Yaesu FT-8900R radio which
works very well. It is OTT though using 

a quad band radio as a link radio.

Has anyone any knowledge if these radios can be used as a temporary fix
until I can get another radio

 

The Data jack pin outs are

1 packet data input, both 1200 and 9600 baud

2 signal ground

3 ptt (ground to tx)

4 9600 bps packet data output

5 1200bps packet data output

6 squelch

 

Cheers

 

Ken G0LCE

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20120321/3a23accc/attachment.html>


More information about the App_rpt-users mailing list