[App_rpt-users] Noise reduction on receive audio from Allstar

Ken ke2n at cs.com
Tue May 8 20:20:43 EDT 2012


Is it possible you are getting discriminator audio from your radio, but
telling asterisk that it is "flat" audio?

 

That would make everything high pitched and noisy

 

 

Ken

 

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Eric Guth
Sent: Tuesday, May 08, 2012 5:34 PM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Noise reduction on receive audio from Allstar

 

Folks, 

 

I notice that when hams are noisy into their Allstar node or the repeater
connected to the Allstar node, the noise on their signal seems to be higher
pitch and accentuated.  Some folks are always noisy and therefore difficult
to copy.  Does anyone else have this problem, and has anyone reduced the
noise with either software running on the server or some hardware inserted
in between the audio from the URI or CM108 dongle to the transmitter?  I was
thinking a DSP audio filter (more expensive than my whole node).  

 

73, 

Eric  4Z5UG

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20120508/456b4291/attachment.html>


More information about the App_rpt-users mailing list