[App_rpt-users] Noise reduction on receive audio from Allstar
ke2n at cs.com
Wed May 9 04:53:29 EDT 2012
OK – well - you could have an analogous situation there, where you have selected pre-emphasized transmit audio and your rig only needs flat, “microphone’ audio.
From: Eric Guth [mailto:eric at efratnetworks.com]
Sent: Wednesday, May 09, 2012 12:13 AM
Cc: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Noise reduction on receive audio from Allstar
I am referring to audio coming from the link and transmitted to me on my node.
On May 9, 2012, at 3:21 AM, "Ken" <ke2n at cs.com> wrote:
Is it possible you are getting discriminator audio from your radio, but telling asterisk that it is “flat” audio?
That would make everything high pitched and noisy
From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Eric Guth
Sent: Tuesday, May 08, 2012 5:34 PM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Noise reduction on receive audio from Allstar
I notice that when hams are noisy into their Allstar node or the repeater connected to the Allstar node, the noise on their signal seems to be higher pitch and accentuated. Some folks are always noisy and therefore difficult to copy. Does anyone else have this problem, and has anyone reduced the noise with either software running on the server or some hardware inserted in between the audio from the URI or CM108 dongle to the transmitter? I was thinking a DSP audio filter (more expensive than my whole node).
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the App_rpt-users