[App_rpt-users] Any RTCM Voter Installations Out There?

Tim Sawyer tim.sawyer at me.com
Thu May 17 15:28:10 EDT 2012


There are two halves. 1) the RTCM needs to be connected to the radio and configured. 2) configure app_rpt/chan_voter. You are asking about the second half. 

First, you should always update from SVN when setting up a new system and periodically thereafter. The instructions are  on the Allstar site in the support section.

Then chan_voter needs to be configured. That happens by adding one file (voter.conf) and modifying one line in rpt.conf.
--
Tim
:wq

On May 17, 2012, at 11:35 AM, Frederick Bray wrote:

> Hi Tim,
> 
> Thanks for the offer of help.
> 
> Assuming that I have a clean install of the latest ACID Centos distribution, what do I need to add to get the voter functionality? I'm just looking for a bit of an overview -- such as "compile and install X" rather than detailed step by step instruction as to how to do it.
> 
> Thanks.
> 
> Fred
> 
> On 5/17/2012 11:10 AM, Tim Sawyer wrote:
>> I'm not so sure about an "average" user, but I'm glad to help anyway. :-)
>> 
>> The stuff on the project page is old. There's a newer voter doc on the micro-node site. Read through that but don't feel bad if it doesn't make total sense. It's easy once you know how. I'll be glad to help you shorten the learning curve. Just send me an email off list or post your questions here. Telephone is ok too... sometimes that's much easier.
>> --
>> Tim
>> :wq
>> 
>> On May 17, 2012, at 9:27 AM, Frederick Bray wrote:
>> 
>>> I very recently purchased my RTCM module and will be ordering a second one soon.
>>> 
>>> It will be a while before I have time to get it all running, but I thought I'd see whether there are any "average" users out there who might relate their experiences for the purpose of helping to educate me.  (Jim Dixon has very kindly offered assistance, but because of work commitments it will be a while before I can meet with him.)
>>> 
>>> I gather that chan_voter isn't included in the current ACID CENTOS distribution and will need to be compiled on my system.  I can do this as I have a little bit of UNIX/Linux experience, but I don't want re-invent the wheel unnecessarily.
>>> 
>>> Is there any documentation that I should be reading in addition to that on the voter project site?
>>> 
>>> Thanks.
>>> 
>>> 73,
>>> 
>>> Fred Bray
>>> W6WAW
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> 
> 




More information about the App_rpt-users mailing list