[App_rpt-users] Sorta Allstar related

Steve Passmore k6kya at hokeynet.net
Tue Nov 6 18:44:40 EST 2012


I use the following line in rpt.conf for the stream.

outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 24 --highpass 0.2
-r -m m -s 8 --bitwidth 16 - -  | /usr/bin/ezstream -c
/etc/ezstream.xml

By adding --scale n, where n is a number less than 1 you should be
able to lower the level,  I haven't tried this but it should work.

outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 24 --scale 0.8
--highpass 0.2 -r -m m -s 8 --bitwidth 16 - -  | /usr/bin/ezstream -c
/etc/ezstream.xml

For reference: http://lame.cvs.sourceforge.net/viewvc/lame/lame/doc/html/switchs.html

Steve

On Tue, Nov 6, 2012 at 10:24 AM, Alan Adamson <adamson_alan at hotmail.com> wrote:
> I'm using the command in the rpt.conf file to stream audio to an Icecast
> server, but I need to somehow lower the level on what it sent to the server…
> Would anyone know how to do that… I'm assuming because it's sent through the
> console interface that I might be able to string some commands together or
> the lame stuff can do it, just looking to lower it by 3 to 6 db if possible.
>
> Thanks,
>
> Alan
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>



-- 
IMPORTANT: This email is intended for the use of the individual
addressee(s) named above and may contain information that is
confidential privileged or unsuitable for overly sensitive persons
with low self-esteem, no sense of humor or irrational religious
beliefs. If you are not the intended recipient, any dissemination,
distribution or copying of this email is not authorized (either
explicitly or implicitly) and constitutes an irritating social
fauxpas. No animals were harmed in the transmission of this email,
although the mutt next door is living on borrowed time, let me tell
you.



More information about the App_rpt-users mailing list